Looking for a spotlight mounting bar

[mr_magicfingers]

I have a 2001 Colorado D4D, I've bought a couple of spotlights to give a bit of extra lighting on the country lanes here in Devon but need something to mount them to on the front bumper. I couldn't find an A-Bar available and wondered if there's anything else suitable. They're slightly too deep to sit on the bumper itself so need a way to mount them solidly. I don't want a full winch-mount type bumper, can anyone suggest something else that might work?

If I can't find anything suitable I may have to just bodge together a bracket that bolts to the support member behind the grill.

 

[Doodle]

From experience, that bumper mount isn't very strong and will allow the lights to wobble. You'll need to brace it elsewhere - possibly with some spotlight stays back to the slam panel.

 

[TALAMAN]

From experience, that bumper mount isn't very strong and will allow the lights to wobble. You'll need to brace it elsewhere - possibly with some spotlight stays back to the slam panel.

Excuse my ignorance Doodle, what is a slam panel please?

 

[Chris]

The bit where the bonnet slams shut
If you look at my old bus from years back, you can see that I went through the top of the bumper but fitted threaded rod adjuster stays at the top. These were actually carburettor linkages. They were pretty steady.

 

[Shayne]

To simplify take the bumper off and you will find a steel bumper under it .