Search results

Hi Shane Yes I have already installed a new headlight stalk (righthand version very hard got) My only thought is. The headlight canbus units have only h4 stamped on them. (Even though they have 3 trispade connector for input and output) I wonder does it only apply correction/resistance...

Bad news all, I did splash out (£10) on the load resistors like your pic, However it still hasn’t fixed the problem. From my Initial post at the start, Now: All electrics are behaving perfectly through our the rest of the cruiser, While all other light functions are normal...

Yes Davet!! Thank you for replying to this. This be is the answer that has kept me awake at night for months. It makes so much sense that the loads are different when changing from halogen to led, but I didn’t think that I would need a certain load (or load resistors for that matter) across...

Any updates on the fender mirror Steve? Thanks Gav

Hi everyone. Just thought it might help someone later. I fitted my new headlight/flasher stalk (Right handed one extremely rare to get it seems) It seemed to have fixed my dead dip beams and is behaving as it should Hover I have spotted that I wired my dips and head backwards (So that...

Sounds awesome Steve Much appreciated. Let me know and we’ll try join the dots on it……

Wel actually lads, I tried to buy from amayama but upon checkout, I got a message saying they will have to investigate the items and get back to me. That was a week ago. Heard nothing since

Hi Steve h Wow that would be great if ya have one….. keep me posted. No rush at all.

Wel what I’m hoping for is when I replace my lights/indicator stalk, all will be well, But i wanted to do the research b4 hand and see if any educated opinions could keep me on the straight and narrow b4 I pull the pull the entire black red wire out of the yota cause it looked and me funny and...

Oh thanks Bert, sorry Shane I never heard of them b4 So a good service then???? Thanks

Yeh looks the right one Shane, but how trust worthy are you of that site and 2nd is the quality any good. It’s Hard to tell what your gonna get from a schematic Have you ever bought from them or know any1 that has???? Thanks Gav

Yeh it Defo is a jap thing. Mine had one, but previous owner pulled it off So I’m looking to replace it……… Can’t be got new I’ve found…….

Hi everyone I’m trying to track down a fender mirror for my RHD j90 1997 Prado I’ve seen a few spurious options but I was hoping for a direct replacement seen as the passenger side fender has the bolt holes already. Any help would be appreciated Thanks

All other electrics Interior and exterior function correctly. Indicators fine Side/parking lights fine Dip headlights dead Full headlights and blue light in dash fine 7 pin plug fine Good battery and good 14+ volt with engine running.

Any other suggestions as to why I don’t have power at the dip beam headlight connector??? And possibly a battery drain now…….?? I’m Baffled!!

Hi Adam I was planning the exact same and hope will still get to, But I measured that outlet the other day and from my quick assessment, they have power full 12v all the time when engine running suggesting they are for some Other purpose than switches lights……… but there are a few connectors...

Also if you Study this photo in the loom above the green/white wire is the red/yellow Through to the stalk from The integration rely

Studying the wire diagram all seems to match but according to that there is no red/yellow wire entering it exiting the Integration relay which doesn’t agree but I could be wrong and was hurrying along due to darkness……. Thanks for the diagram tho…. Will come in handy later with front fog light...

It’s a 1997 j90 Prado. 1kz diesel I don’t have a wire diagram for it, but looked up a few but still studying to be honest……… I found that the same red yellow wire directly from headlights come through into cab and go into integration relay and then head one twist switch on the head...

Hi guys Too add my 2cents I would examine the glow plugs and the immediate areas around them when mounted in the cylinder head. The tolerances are very small around them and they could ground very easily with some debris or foreign item in the wrong spot or (perhaps a wire is damaged off...

Hi Karl Thanks for reply. Yes checked all fused internal and external with 12v supply and continuity/multimeter (All act/sound/ behave normal) Also 8pin plug is new last year and smothered in grease and behaved 100% normal daily before I rolled up my sleeves at the headlights. Can any1...

Hi everyone. Reading for hours and haven’t spotted a solution yet. I’m upgrading my halogen headlights to whole led units. 90 was Totally fine in lead up to it, never a single electric glitch of any sort. Low mileage so very fresh anyways. I was playing around with the head relay (in fuse...