Don't like the adverts?  Click here to remove them

Dip beams dead

Reason for asking about the parking lights and number plate lighs is they seem to go through that integration relay so if they work, it cant be totally dead...
 
Wel what I’m hoping for is when I replace my lights/indicator stalk, all will be well,

But i wanted to do the research b4 hand and see if any educated opinions could keep me on the straight and narrow b4 I pull the pull the entire black red wire out of the yota cause it looked and me funny and smelled of scorched grease at 3am of a Sunday night…….and wasn’t even related to a relay or light for that matter……..
 
Hi everyone.
Just thought it might help someone later.

I fitted my new headlight/flasher stalk
(Right handed one extremely rare to get it seems)

It seemed to have fixed my dead dip beams and is behaving as it should

Hover I have spotted that I wired my dips and head backwards
(So that another days fiddling)

I read here or on another forum…..
……. 12v goes through the stalk and because I burned out the contacts in the stalk any signal could not get past the stalk through to the relays in the fuse box and thus to the dips or headlights.

Thanks for help and advice along the way tho.
I’ll stick up a photo of my headlight mods later…….happy with the look but performance is yet to be confirmed…..
 
Back
Top