Don't like the adverts?  Click here to remove them

Bull bar and antenna

jackie-0

New Member
Joined
Jan 13, 2021
Messages
21
Country Flag
sweden
Hi,

My last post was resolved withing 24 hours so hoping you guys might be willing to help me some more :icon-rolleyes:

Driving the car home from the dealer I blew the fuse for the stereo/cigarette lighter. Fuse now replaced and all is working except the antenna wont go up or down any more unless manually pushing/pulling it.

Any idea how to reset this?

Also I am looking for a wrap around bullbar and have laped the internet without any success. I believt the original parts number was PZ427J9980ZB but Toyota do not sell the part anymore, at least not in Sweden.


Does anyone have any good suggestions for places to turn to buy old parts/acessories?

As always, grateful for any pointers!

cheers
 
I'd say the antenna maybe needs stripdown and lube, maybe you could extend and rub in oil and see what happens but IMO likely a strip down job.

We have specialist 4WD wreckers over here, maybe you have something similar?
 
ok will give it a try, hoping easy fix.

There is a breaker and I have serached but I cant seem to find any brush guards at all excepy for the one from ARB which I dont like.

Does anyone happen to have the measurements for the fittings? I am wondering if I could get a brush guard for a 4 runner for example?
 
Fabryka 4x4 is one of the few places that make and sell aftermarket parts like bumpers and rocksliders for the 90 series and Roughtrax is popular for replacement parts here in the UK .
 
Don't like the adverts?  Click here to remove them
You could try AFN Portugal for front and rear bumpers West Coast Offroad here in UK suppy these you may have a supplier closer to you Fabryka have done custom builds on their stuff or maybe go to your local welder and get them to build exactly what you want
 
@Shayne , SteveJB; thanks for the suggestions!

Unfortunately none have what I am looking for. The ARB style bumpers are a bit too hard crore fore me.

Maybe a local welder is the best option. Will see what i can find....
 
Back
Top