Don't like the adverts?  Click here to remove them

Exhausts for 80 series

G

Guest

Guest
Hi Chris,
I had a stainless system from Frogs Island about two years ago on my 80 series, then it was less than =A3500, and it's still going strong, being stainless it should be!
Chas
----- Original Message -----
From: chris coombs
To: [Email address removed]
Sent: Wednesday, May 20, 2009 9:49 PM
Subject: [ELCO] Exhausts for 80 series
Hi All
I have a 96 80 series, 24 v, manual the exhaust has started to blow - does anyone have any good contact details, preferably in the South East as I live in Kent, to get an exhaust made or fitted, possibly a stainless steel option might be good
Look forward to your replies
Ta
Chris
07812 344740
 
Hi Chris
I had a stainless 2 1/2" system made with just one box and the exit just in front of the back wheel about two years ago.
It is a little noisy when you boot it but in general it is not too bad.
At Christmas we went to the French Alps and back and I can't say the noise was ever intrusive.
I had it done at one of these boy racer exhaust places in Redhill, Surrey for =A3300.
I live in Crawley if you ever want to see and more importantly hear it.
Regards
Les
07595543180
Hi All
I have a 96 80 series, 24 v, manual the exhaust has started to blow - does anyone have any good contact details, preferably in the South East as I live in Kent, to get an exhaust made or fitted, possibly a stainless steel option might be good
Look forward to your replies
Ta
Chris
07812 344740
 
Back
Top