kombivan
Active Member
- Joined
- Oct 6, 2017
- Messages
- 81
- Country Flag
When I go to start it it starts and when I let go of the key it shuts down straight away. Then if I retry it starts and runs without problem. I have put a new module in the bottom of the pillar and all the rust in the pillar and planitary chamber has been removed so it doesn't leak water again. The rod from the ettic motor (engine control unit) was around the wrong way and it starts more frequently first try when warm but not when cold there is only 40,000ks on this engine full rebuild almost like a new engine. I have no idea why it cuts out on first start then starts on the second turn of the key would appreciate any help.
2h engine
2h engine