Replacement front bumper

[Rob Cowell]

If anyone has a front bumper - maybe you've swapped for a winch enclosing jobbie - and you might want to sell, let me know? Turns out the expertly duct taped corner of mine wasn't as good a repair as I'd like and is now lying on an autoroute somewhere near Limoges. Have spotted one on eBay but it's holed. Can bumper plastic be repaired with something that won't crack if flexed? Is GRP OK for that?

 

[froggy Steve]

Bummer, not too far from me! If only I had known, would have sent misses out to get it for you....
Steve

 

[Rob Cowell]

Bummer, not too far from me!
Steve

Lot of 3 door 120s down your way I noticed. Don't think I'd seen one before last week.

 

[froggy Steve]

Yes, I have seen quite a few, very few 95's and an occasional 80/100. There are 2 40's that I know of, one an old customer has, and another near a customer that I see occasionally.

Steve

 

[Leigh]

Rob - let me know if you are still looking for one of these.

 

[Rob Cowell]

Hi Leigh. Yes, still in the market.

 

[Leigh]

Rob, I will send you a PM with details.