Knucklehead
Well-Known Member
- Joined
- May 28, 2013
- Messages
- 408
Title pretty much says it all but here goes...
Have been on the look out for some cheap steel wheels for offroad bash duties.
Got offered a set of 16x8 with 0 offset. So far so good.
Problem is my std alloys take the earlier 'cone' type wheel nuts while these steels use the later flat washer style.
Can you fit later style steel wheels with the suitable nuts to the earlier type hubs?
Thinking hubs and studs would be the same but maybe not?
Advice appreciated before I fit wheels that then drop off!
Dave.
Have been on the look out for some cheap steel wheels for offroad bash duties.
Got offered a set of 16x8 with 0 offset. So far so good.
Problem is my std alloys take the earlier 'cone' type wheel nuts while these steels use the later flat washer style.
Can you fit later style steel wheels with the suitable nuts to the earlier type hubs?
Thinking hubs and studs would be the same but maybe not?
Advice appreciated before I fit wheels that then drop off!
Dave.
Last edited: