G
Guest
Guest
From: [Email address removed]
Date: Tue, 6 Nov 2007 01:01:39 EST
Subject: [ELCO] Overland Query: Sand ladders / 'Perforated Aluminium
Boards' / Waffle Boards
Reply-To: [Email address removed]
-------------------------------1194328899
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Excuse my ignorance, but can I assume that the GRP/kevlar is one and the
same thing, and that all waffle boards are made of that material?
I expect we will be travelling solo on pistes for periods of time and as a
peace of mind item and despite the fact that people will appear out of
nowhere
to push, I will probably end up with waffle boards. If I can not source
the
right length, will cutting them to size effect the strength/integrity
of the
board?
Regards
Peter
'94 1HD-T(auto), 2.5"OME, oil cooler
The waffle boards can be cut to fit, you must seal the ends with
fibreglass sealant, two part stuff. You can cut them with a carbide
tipped power saw.
I bought a container load last year
If you want the engineering sheets drop me a line at [Email address removed]
I think shipping from Japan is not on for these so let's not even ask.
But the information is free. Alas it is all in inches and pounds.
Oh and the surface on the waffle boards is coated with a sealed grit
that will take the skin off your hand, so no worries on the slipping off.
--
Dave Stedman
Japan4x4
http://www.japan4x4.com/
Importers and Distributors
[Email address removed]
Direct Dial to Dave from the USA 510-931-6324
Date: Tue, 6 Nov 2007 01:01:39 EST
Subject: [ELCO] Overland Query: Sand ladders / 'Perforated Aluminium
Boards' / Waffle Boards
Reply-To: [Email address removed]
-------------------------------1194328899
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Excuse my ignorance, but can I assume that the GRP/kevlar is one and the
same thing, and that all waffle boards are made of that material?
I expect we will be travelling solo on pistes for periods of time and as a
peace of mind item and despite the fact that people will appear out of
nowhere
to push, I will probably end up with waffle boards. If I can not source
the
right length, will cutting them to size effect the strength/integrity
of the
board?
Regards
Peter
'94 1HD-T(auto), 2.5"OME, oil cooler
The waffle boards can be cut to fit, you must seal the ends with
fibreglass sealant, two part stuff. You can cut them with a carbide
tipped power saw.
I bought a container load last year
If you want the engineering sheets drop me a line at [Email address removed]
I think shipping from Japan is not on for these so let's not even ask.
But the information is free. Alas it is all in inches and pounds.
Oh and the surface on the waffle boards is coated with a sealed grit
that will take the skin off your hand, so no worries on the slipping off.
--
Dave Stedman
Japan4x4
http://www.japan4x4.com/
Importers and Distributors
[Email address removed]
Direct Dial to Dave from the USA 510-931-6324