Don't like the adverts?  Click here to remove them

What thread is @ the bottom of a CB twig........

sae70

Well-Known Member
Supporter
Joined
Aug 10, 2010
Messages
2,662
Garage
Country Flag
uk
.......the title is a little missleading as I already know that it's 3/8" :) But what UNF, UNC, BSP, BA, MFT :?: :!: You know what I mean :D The reason I'm after finding out is I was on the cusp of ordering a LightForce mag base portable work light £65 ish :shock: When I remembered that I have a mag mount up the shed that I don't use so I'm going to cut off the coax & bolt a cheaper 10/20 quid work light on top :D :thumbup: I just need a bolt that will fit :D
 
If you have the "standard" mag mount, it will not matter what type the thread is as you can undo the nut on the underside and fit any threaded bar/bolt you want.

Paul
 
Paul_Humphreys said:
If you have the "standard" mag mount, it will not matter what type the thread is as you can undo the nut on the underside and fit any threaded bar/bolt you want.

Paul
Ah......right I'm off up the shed to 'ave a look :thumbup:
 
Paul_Humphreys said:
you can undo the nut on the underside and fit any threaded bar/bolt you want
You were bang on Paul :thumbup: Under the rubber base protector is a 13mm nut & stud & once removed a hole :p Absolutely perfec :clap: Thanks for that :D
 
Back
Top