tommyboyblitz
New Member
- Joined
- Jul 12, 2022
- Messages
- 3
- Country Flag
Got a 120 3.0 d4d. Old engine came out with a melted piston on no. 1 before I bought it. I've put another engine in from another landcruiser. stripped the engine and its all good, new head gasket etc.
On idle it doesn't smoke, or the tiniest sign of smoke from the exhaust. If rev up it starts to smoke and get worse. Thick white smoke, does smell oily. Did find 2 dead injectors on this engine after putting it in which I've replaced.
Turbo had very little play.
I would say its the Turbo dumping oil into the exhaust one spooling up, but could it be anything else?
The old Turbo had snapped its shaft so I do wonder if its dumped a tonne of oil into thr exhaust which starts to burn with the hotter exhaust from higher rpm?
Any other ideas?
Cheers
On idle it doesn't smoke, or the tiniest sign of smoke from the exhaust. If rev up it starts to smoke and get worse. Thick white smoke, does smell oily. Did find 2 dead injectors on this engine after putting it in which I've replaced.
Turbo had very little play.
I would say its the Turbo dumping oil into the exhaust one spooling up, but could it be anything else?
The old Turbo had snapped its shaft so I do wonder if its dumped a tonne of oil into thr exhaust which starts to burn with the hotter exhaust from higher rpm?
Any other ideas?
Cheers