Search results

Just received the latest bunch of bits for my 60.. A set of arch flares (freshly painted) mud flaps to match, a pair of clear front indicator lenses (not been able to find these anywhere) a pair of inner bumper trims for the rear bumper (no longer available) and a lens for my tail light (a...

Hi All, I'm thinking of getting some green T10 24v LED bulbs for the dash backlights on my 60 series. Does anyone know how many bulbs would be needed? My car is in Zim and I'd like to take the bulbs with me when I go back. Cheers...

Can anyone guess what the bumper lights came off??

https://www.ebay.co.uk/itm/126911013612?_skw=toyota+hj60&itmmeta=01JQXZAVTVHBT78MDCTPAX5VAE&hash=item1d8c7c62ec:g:nhAAAOSwBFNnm4az&itmprp=enc%3AAQAKAAAA0FkggFvd1GGDu0w3yXCmi1dzLTD9jYry61v7M7qBacn7xD4K5AWB6KxFePmlUJB7rDby%2BFGtdEJKPSJwkIs2Zh4Hjo2P%2Bf9L7H8MrFFGKj911kogTFULQw75QHC3sYlZJxpKt2eWgGS7x...

As usual in Zimbabwe, the paint job went right to the deadline.. finished at 7pm in the dark and then I flew home to the UK at midnight.. Very happy with the results though.

Hi All, Does anyone by any chance know what the diameter is for the rubber breather hose for the transfer case on a 100 series manual transmission(the one highlighted in the picture). The muppets who replaced the rear oil seal on mine have failed to re fit the breather hose.. Just hope I...

My 60 about to get a fresh coat of paint. A few bits of the gutter trim have seen better days, should I leave them off? or get some replacement bits? Personally I'm tempted to leave them off but what do the club think? The grille and other plastic bits are being painted matt black so the only...

New clutch fitted, slave cylinder overhauled, rear diff pinion seal replaced, 2 new batteries and battery terminals fitted. Tomorrow it's off to the spray shop to have a full respray and a new windscreen fitted and then the new decals applied.. Can't wait to see it once it's done.

Has anyone tried Timbren bump stops I was wondering what the difference was between the Timbren ones and a hollow rubber spring of a similar size from AV Industrial, apart from the price? https://exitoffroad.com/product/timbren-abstof-active-off-road-front-bumpstops-kit/...

Should the EDIC on a 2H stay in the over inject position for a few seconds while the engine is starting? Mine flicks into the over inject position when you turn the ignition on but the immediately moves to the run position before the key is turned to start. The engine does start although it...

New Terrain Tamer parabolic springs and shocks fitted.. truck is looking fab with it's 2" lift. Pictures later..

Hi all I'm looking for a picture and possibly the part number for the voltage regulator on a 2H 60 series 24v set up. Unfortunately a previous owner has improvised and replaced the voltage regulator with a non standard Bosch regulator.. it appears to be working but I'd like to get it back to...

I want to get rid of what is left of the chrome on the front grille and headlight surrounds on my 60 series. I've done a bit of googling and it would appear that leaving the bits in a de greasing liquid will do the trick. Anyone tried this?

My 60 Series has 2 old school pop up glass sunroofs fitted and I'd quite like to get rid of them. One of them is leaking and they are both covered with silicone from previous attempts to stop leaks. Anyone ever tried this on a 60 series? It has ridges in the roof so I'm not sure what the best...

Just popped up on FaceBook, an easy fix for sagging seat back nets

Hi All, I placed an order from tougenation.com.au for a new set of decals for my 60 series. Since I got the order confirmation I've not had any communication from them and no reply to my emails? It does say on the website that decals are made to order and I should expect a 3 week turn around...

Hi all, I'm on the hunt for a Hall effect sensor for the rev counter on my HJ60 it would appear that someone has managed to either screw the original one in too far (although I'm not sure how that's possible) or possibly used the wrong one. It seems to be the same for most of the HJ60s Part...

Just ordered a set of these for my 60. Hope they are as good as they look online.. TOWNSVILLE BODY STRIPE KIT : J60 LAND CRUISER - [Leaving Land Cruiser Club]

Anyone tell me how often a 1HDT fuel pump should be serviced. As far as I know mine hasn't been serviced since the car was new it's now done 255000kms. The car runs well and no real issues, it has a bit of black smoke from the exhaust since the GTurbo was fitted but EGT rarely reach 700c. I have...

Typical, you wait ages for a nice 60 to pop up and then the day you buy it another one pops up

I couldn't resist.. just managed to buy this lovely beast to add to my collection in Zimbabwe...

It's a bit of a long shot, but does anyone know where I can get some CAD drawings of underbody protection plates for my 100 series? My Cruiser lives in Zimbabwe and it's pretty much impossible to buy anything like that off the shelf so I was thinking of having some made up.

Hi All, I've decided that it's probably high time I replaced the 25yr old steel cable on my OEM winch with a synthetic rope. I was wondering if anyone could recommend a decent rope and advise what length and diameter would be the best fit. Not looking to spend a crazy amount of money, the...

So I've just had the seals done on my 100 series steering rack as it was leaking into the n/s boot. When we drained the system the oil was quite emulsified, I assume water has managed to get in somehow.. this had caused some really bad pitting on the shaft which has had to be replaced with a...

Somewhere in Zimbabwe

This just came up on my FaceBook feed, might be of interest to someone. It's not mine and I'm not connected in any way

I'm having my shinny new G Turbo Grunter fitted today and was wondering if anyone would be interested in buying the old one. There's nothing wrong with it, I'm only upgrading for fun. The turbo is off a 100 series 1hdt with 252,000 km it's had 2 owners from new and came to me in 2017 with a...

Hi All I am just about to fit a shinny new GTurbo Grunter to my 100 series 1HDT and I'm thinking it's only a matter of time (possibly not very long) before I will need to get the clutch uprated to cope with the extra torque. Can anyone recommend a good uprated clutch? Preferably something I...

Does anyone know if these will fit a 100 series? New 5 Speed Manual Gear Shift Knob Lever Fit For 4Runner/Hilux /Land Cruiser | eBay - [Leaving Land Cruiser Club] Listing says for 4Runner Hill and Land Cruiser but nothing about the 100 series

My first proper play in the Cruiser

A bit of off road fun in the mud in Harare..

I've fitted a pair of Airlift 1000 airbags to the back of my 100 series, I have to say I'm really happy with the results. I needed a bit of extra support in the rear when loaded for camping with the Bundu on the roof and fridge in the back + all the food and beer it was a bit low and a bit soft...

After a fair bit of consideration and a bit of a disappointment with another turbo. I've decided that some time in the next few months I going to order a G Turbo Grunter for my Cruiser. Would any one else be interested in getting together and buying a few and combining the shipping? I don't...

Recreational Gallery | Commander Defence Systems - [Leaving Land Cruiser Club]

Not mine, wish it was though. Lovely FJ45 for sale in South Africa R395,000 just over £19k

Wrong on so many levels..

Anyone breaking a 100 series? I need a couple of little bit and pieces for mine. Cheers

At last I managed to get my Cruiser properly off road.. Did my first river crossing, a bit scary and I should have walked it first.. I made it though and I'm sure I still had a bit of depth to spare. The 2 guy's who decided to follow my tracks (in the opposite direction) 1/2 an hour later...

Anyone know of a way to stop the chime when you open the drivers door with the keys in the ignition? I'm also wondering if there is a way to stop the easy entry steering from going up and down. Can I set It where I want it and pull a fuse?

Anyone know where you can get a pillar mount gauge pod for a 100 series, fancy fitting a boost gauge with my new turbo

Just about to buy a Wink turbo for my Cruiser :):)

Spraytec in Zimbabwe have built a 100 series pick up, looks pretty good.. Bei Facebook anmelden - [Leaving Land Cruiser Club]

Anybody using Kumho MT tyres? I'm thinking of getting a set for my 100 series. They are 1/2 the price of BFG Ko2 that I'm running just now and I fancy getting something a bit chunkier for driving off road in Zimbabwe (mainly in the rain season).

Has anyone fitted one of these to their Cruiser? https://www.femco.com/quick-drain-plug/

As the title say.. Bonkers but I think I like it

This os for sale in Zimbabwe, any ideas what it might be worth in the UK fully restored? I have a friend in Zimbabwe who has restored a few already. Would be an interesting venture...

What a lovely place to spend the night. The Save Conservancy, Zimbabwe.

My power steering rack has developed a leak from the top where the steering column joins the rack. Has anyone else on the forum had this problem? I've attached a picture but it isn't very clear. It seems to be leaking from under the rubber dust cover.

240,ooo km and still going strong