good evening all. please forgive me if I'm not in the correct forum. very tech unsavvy. I have two Prado and a 1hz pickup in Zimbabwe. recently picked up a 1kz Prado as a run around and have had to rebuild the engine first trip out. big ends went. compcomp rebuild done in a very rundown garage in the bush but all in place. problem is the engine cranking but no firing at all. removed the head which was honed suspecting compression problem but all fine on head. diesel present on injector inlets but can't diagnose as there is no proper workshop where I am. can anyone help with suggestions for common problems I can look at? even tried quick start with no result. checked fuses all ok. injectors tested with hand compression pump and seem to be ok. we pull started in desperation and engine caught but with no power at all and foot flat on accelerator. any help would be greatly appreciated. cheers rich