Don't like the adverts?  Click here to remove them

2.4 (2 LT) or 2.8 (3 L) Turbocharger

bleka

New Member
Joined
Sep 3, 2013
Messages
23
Country Flag
montenegro
hello guys, i just installed a turbine on my model 2.8 d (3l engine) but i have a problem with the turbine. although I bought it through aliexpress and I didn't go even 15 km, it started to leak oil.

i installed a complete kit with 2.4 engines so everything came factory..

question, do any of you have experience with the installation of a turbine of another model, I read that it can be mounted with a few modifications from the ALFA ROMEO 159 2.4 JTDM Turbo Charger ..so I wonder if any of you have experience with it and maybe some recommendation ?!
 

Attachments

  • 20210529_102828.jpg
    20210529_102828.jpg
    157.1 KB · Views: 35
  • IMG-ceeb63532f41b45541d95a27555abc48-V.jpg
    IMG-ceeb63532f41b45541d95a27555abc48-V.jpg
    186.6 KB · Views: 37
  • 20210528_185854.jpg
    20210528_185854.jpg
    230.7 KB · Views: 34
Last edited:
They all look the same because it only fits one way but some are reliable quality and some are not .
 
Re-reading your first post your looking to increase power because it has to come off again .

I just added one of these and set it to 14psi because thats the limit of the 1kz-te before the electric fuel pump will force limp mode .

1622443643509.png
 
Back
Top