Andy Harvey
Well-Known Member
- Joined
- Mar 6, 2010
- Messages
- 343
On the 80 series there is an accessory power point under the bonnet - battery 10amp, battery 20 amp, ignition switched and earth. Is there something like this on the 100 as I'm buggered if I can find it. There is a relay pack off the +ve battery terminal on the drivers side which I initially though may have feeds underneath it but it doesn't look like it. I want to take an ignition switched feed for the power for my front camera. Is there somewhere simple or do I need to take a feed back to the ignition switch. If so I will probably wire up a 30 Amp relay switched by the ignition siwtch and then cabled to a power distribution block for this so I have some extras.