bumper again

[Guest]

Hi Guys
I was just wondering if any of you have or know of a lonely front bumper who
just wants a good home. Even a TJM or ARB might suit.
cheers
john 92HDJ 80 1HDT

 

[Guest]

Hi Guys
I have tried a search for TJM stuff in the UK and cant find a dealer.
Who does their stuff and where please.
cheers
john
92HDJ 80 1HDT

 

[Guest]

John,
I am not sure about this but I think it's a company called 'West
coast 4x4' in or near Liverpool.
Why are you after a front bumper?
Regards, Clive.

 

[Guest]

Hey Clive
I bent mine a good bit and scratched it a good bit to the point I dont like
it any more, all in one go while being stupid on an off road course. It
looks crap and really takes away from the look and of course it now bent
inwards so nothing left to move really.
cheers
john 92HDJ 80 1HDT

 

[Guest]

Hi John,
I don't think there is a proper one. Your best bet is to try All-
American in Holland - I think they have the European distribution
rights.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Skype: julianvoelcker
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift

 

[Guest]

Hey Julian
Thanks have you got their www bit
cheers
john 92HDJ 80 1HDT

 

[Guest]

John,
A cheaper option is to find someone who is replacing their bumper to
fit a winch bumper and then buy their old bumper - does Gareth have any
spares lying around?
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Skype: julianvoelcker
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift

 

[Guest]

Hi John,
http://www.all-american.nl - if emailing send for the attention of
Maarten and mention my name and ELCO - it might help one of us ;-)
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Skype: julianvoelcker
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift

 

[Guest]

On Apr 25, 2006, at 3:00 AM, Julian Voelcker wrote:
> http://www.all-american.nl - if emailing send for the attention of
> Maarten and mention my name and ELCO - it might help one of us ;-)
Hi julian
that site never worked-neither to see the products either to email
them :-(((((((((
Lubo Oslo
96hdj80

 

[Guest]

John
I have the following email address for Maarten J.M.Verschure:
[Email address removed]
Christopher Bell
| -----Original Message-----
| From: [Email address removed]
| [mailto:[Email address removed]] On Behalf Of John Byrne
| Sent: 24 April 2006 23:34
| To: [Email address removed]
| Subject: Re: [ELCO] bumper again
|
| Hey Julian
| Thanks have you got their www bit
| cheers
| john 92HDJ 80 1HDT
| --
| European Land Cruiser Owners Mailing List Further Info:
| http://www.landcruisers.info/lists/
|
____________________________________________________________
Electronic mail messages entering and leaving Arup business
systems are scanned for acceptability of content and viruses

 

[Guest]

Hi Lubomir,
YEs, they are too busy working on landcruisers to finish off their
site.
Email Maarten directly using the address provided by Chris.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Skype: julianvoelcker
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift

 

[Guest]

Maarten is an extremely helpful guy and All American are a good company
to deal with. I have bought a few things from them and am always very
happy with their service, don't let the web site put you off doing
business with them.
Best regards,
Jon.
-----Original Message-----
From: [Email address removed] [mailto:[Email address removed]]
On Behalf Of Julian Voelcker
Sent: 25 April 2006 10:31
To: [Email address removed]
Subject: Re: [ELCO] bumper again
Hi Lubomir,
YEs, they are too busy working on landcruisers to finish off their
site.
Email Maarten directly using the address provided by Chris.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Skype: julianvoelcker
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift

 

[Guest]

John, your best bet is to have a good look at the vehicles attending the Salisbury meet.
I had a low profile winch bar made for my 80 as I am not keen on the ARB bars or the like. Mine is very similar in design to the Slee low profile type. It has a simple bolt on A -bar with spot light brackets thereon.
The approach angle is better than the O/E Toy bumper.
I'm very pleased with standard of fabrication and fit although I wish I had got it galvanised then painted. As supplied it was powder coated and I think this will deteriorate with time.
Anyhow you can have a good look on Thursday pm !!
Regards Gareth

 

[Guest]

Hi all,
I've been also a satisfied customer of AAI and only have words of
praise Maarten's technical knowledge.
The only slight problem while dealing with them is that they won't
accept a credit card payment, only bank transfer. And don't be tempted
to send them cash - there's a thieving ba$tard at the Dutch post
office depot. Ask me how I know!
--
Rgds,
Roman (London, UK)
'92 HDJ80
On 4/25/06, Jon Wildsmith <[Email address removed]> wrote:

 

[Guest]

Hi Guys
The only reason I was asking about the bumper thing is I thought I could
pick up one while im over as postage is really cruel.
But it appears it is not to be, faith is not kind to me this week.
If I could weld etc etc, in other words do something technical with
equipment I would make one myself but seeing as how im challenged in that
sence, I think ill skip that stupid thought.
cheers
john 92HDJ 80 1HDT

 

[Guest]

John,
I just got this address from the aus. website of TJM.
United Kingdom
Platypus Trading
Castlehill Farm
Flexford Road
North Baddesley
Southhampton Hants S052 9DF
Ph: +44 (0) 2380 274170
Fax: +44 (0) 2380 259940
Email: [Email address removed]
Regards, Clive.

 

[Guest]

Hi Guys
Just thought id let you know that Platypus is no longer doing the TJM
bumpers.
cheers
john 92HDJ 80 1HDT