Garfieldus
Well-Known Member
- Joined
- Nov 18, 2010
- Messages
- 361
- Country Flag
Front locker not working and noticed that the breather is not attached. I expect its full of water and corroded at this stage.
I’ve removed the electrics and the three retainers from the actuator (one bolt and one nut bottom and one nut top) but can’t get it to budge. I’ve tapped the top of the actuator from the front using a long bar and hammer and levered the bottom but not a budge. I don’t want to use too much force and maybe break the housing.
Any ideas what’s holding it in place?
I’ve removed the electrics and the three retainers from the actuator (one bolt and one nut bottom and one nut top) but can’t get it to budge. I’ve tapped the top of the actuator from the front using a long bar and hammer and levered the bottom but not a budge. I don’t want to use too much force and maybe break the housing.
Any ideas what’s holding it in place?