CV joint - Milner Tel No.

G

Guest

Guest
John, get the address book out and write this in -
1629 - 734411 plus your code to the UK.
Gareth.
 
G

Guest

Guest
Hey Gareth
Thanks its gone into the black book already. I went down to Toyota and wait
for it they want 602 euro plus Vat for the Cv joint, talk about a rip off..
They want 32 euro plus for the ( I thought it was a drive plate but its an
outer flange, the thing that the splines of the CV fit into.
How hard is it to put the snap clip on the end of the drive shaft that goes
into the CV. If the clip will not go on is there any way back other than
leave the cruiser unfinished. I know I worry but sure I haven't done this
before and want to cover all the angeles.
cheers
John C
92HDJ 80 1HDT Ireland
----- Original Message -----
From: "Gareth Jones" <[Email address removed]>
To: <[Email address removed]>
Sent: Wednesday, October 05, 2005 10:02 AM
Subject: Re: [ELCO] CV joint - Milner Tel No.
John, get the address book out and write this in -
1629 - 734411 plus your code to the UK.
Gareth.

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.10/119 - Release Date: 04/10/2005
 
G

Guest

Guest
John
Ask George at AAI for their prices (Tel: +31-(0)416-540167, Fax:
+31-(0)416-272304, Email: [Email address removed]). They don't sell
dodgy pattern parts like Milners and standard delivery takes only
three- four days.
--
Rgds,
Roman (London, UK)
'92 HDJ80
On 10/5/05, John Byrne <[Email address removed]> wrote:
ait
..
n
es
05
 
G

Guest

Guest
Hi John,
For a laugh you should ask them the price for the seal kit for rebuilding the
knuckle!
It's a doddle, you should be able to slide it on with your fingers - it is
similar to the clip on the end of the CV where it comes through the drive
flange.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
Don't like the adverts? Remove them by becoming a supporting member.   Click here
G

Guest

Guest
Hi John,
For a laugh you should ask them the price for the seal kit for rebuilding the
knuckle!
It's a doddle, you should be able to slide it on with your fingers - it is
similar to the clip on the end of the CV where it comes through the drive
flange.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
G

Guest

Guest
Hey Roman
Thanks for that but have already ordered and paid for the bits from Milner.
Pattern parts what do you mean. Maybe I can add this word to my ever
expanding vocabalary of cruiser words. I hope you dont think that black
bling cruiser was mine really or did you, well its not I would walk first
and that says a lot.
John C
92HDJ 80 1HDT Ireland
SNIP
Ask George at AAI for their prices (Tel: +31-(0)416-540167, Fax:
+31-(0)416-272304, Email: [Email address removed]). They don't sell
dodgy pattern parts like Milners and standard delivery takes only
three- four days.
--
Rgds,
Roman (London, UK)
'92 HDJ80
 
G

Guest

Guest
On 10/5/05, John Byrne <[Email address removed]> wrote:
John
Damn! You almost got me again! First I tought it must be yours, but
then I thought - hang a miunute... John's motor isn't black!
--
Rgds,
Roman (London, UK)
'92 HDJ80
 
G

Guest

Guest
Hey Roman
I couldn't keep it quite any longer. I thought you may have caught me out
because I dont think who ever owns that has been off road and mine has been.
So am I welcome back into the anti bling bunch or do I still have to earn my
strips. I was waiting for (well it is nice kind off and it looks so nice
kind of and its nice, really nice ) sort of deplomatic comment from someone
who didn't want to hurt my feelings.
John C
92HDJ 80 1HDT Ireland
 
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks