Don't like the adverts? Click here to remove them
Door Mirror
- Thread starter lc 120
- Start date
BobMurphy
Well-Known Member
- Joined
- Mar 1, 2010
- Messages
- 1,963
- Country Flag
You will probably find that the problem is a broken wire (or five) where the harness passes from the body through a rubber boot into the driver's door.
I had the same thing on my '95'. My mirror didn't work and I spent a lot of time removing it and testing it to find that all the functions worked in the mirror. There were a few broken wires in the door entry-point, fixing them cured the problem.
It means removing the door card and the kick panel in the driver's footwell.
I removed the complete harness from inside the door (it didn't take too long):
The broken wires were inside the boot.
I moved the 'boot' along and then spliced in some fresh wiring.
I then put it all back together and its been fine since
.
I haven't done this on a '100' but I expect it will be similar.
Bob.
I had the same thing on my '95'. My mirror didn't work and I spent a lot of time removing it and testing it to find that all the functions worked in the mirror. There were a few broken wires in the door entry-point, fixing them cured the problem.
It means removing the door card and the kick panel in the driver's footwell.
I removed the complete harness from inside the door (it didn't take too long):
The broken wires were inside the boot.
I moved the 'boot' along and then spliced in some fresh wiring.
I then put it all back together and its been fine since
. I haven't done this on a '100' but I expect it will be similar.
Bob.
Last edited:
