Having lived with my '03 120 for a month now I decided to research the lack of 'hold' in 3 (third gear) which led via another part of this forum to pradopoint where a repair kit was available.
I was a bit dubious, not of the kit but of my limited technical ability but it wasn't too expensive so I ordered one.
It duly arrived from Aus along with pictorial fitting instructions via email, what could possibly go wrong. The short answer is, nothing; it took me 20 mins and now I have a fully functioning gear selector. I even managed to retrieve the errant OEM part from the bottom of the selector case with a magnetic screwdriver.
I think this fix has probably been subject of discussion on here before, but I couldn't find it; hence this thread.
I was a bit dubious, not of the kit but of my limited technical ability but it wasn't too expensive so I ordered one.
It duly arrived from Aus along with pictorial fitting instructions via email, what could possibly go wrong. The short answer is, nothing; it took me 20 mins and now I have a fully functioning gear selector. I even managed to retrieve the errant OEM part from the bottom of the selector case with a magnetic screwdriver.
I think this fix has probably been subject of discussion on here before, but I couldn't find it; hence this thread.