Hello
I posted this on the tlcoc forum but have had no assistance yet, so ive put it in here as there has been recent suspension talk on this forum.
I'm just posting to introduce myself and as a few Q's.
Ive been on the 80 series forum for some time now but having sold my old 24v manual , ive been searching for a decent 100 series , anyway i working down in yorkshire for acouple of days and spent a time looking at all the cruisers for sale down there , in the end ive managed to get an 02 model with the new dash and grille facelift , its a 4.2td with the 3sp+OD auto box, The body and chassis seems incredibly rust free and clean ( i'm scottish so i'm used to seeing the effects of salt on vehicles).
The mileage is only 86k with all the old mots to prove so that seems quite good.
It is however my first auto vehicle so i'll need to learna bit about that.
I need to get a vehicle Owners handbook ( not the workshop manual) even just to look at a pdf on the computer would be fine!
The issues ive seen so far are :
Wiper control
there seems to be one function not right ? it has the auto function that works but sometimes stops whilst the windscreen is still wet , and then goes like the clappers when it should be wiping less.
next position down on the lever does nothing ? ( Low spd i think)
bottom position is constant wiper control ( i thin hi spd)
Am i missing the low spd function
( i'm not sure what it should have due to no handbook)
AHC suspension control
Not sur if im doing things right so a bit of guidance here would be a help
note ive been doing things with the doors closed and the tran in park, until on the move.
the dash shows the position led in the N position ( solid Led).
i select low and the led flashes in the low position and lowers correctly
but then when i select N the leds dont change and the vehicle doesnt attempt to lift. but once the vehicle is on the move the led starts blinking on N and the suspension pumps up to the N position.
when i select the high position the led does not even flash or light in the high position in stopped or whilst driving ? Ive also tried selecting High whilst in Low range but this also has no effect.
Any pointers giving advise or links to internet info would be a great help thanks
greg
I posted this on the tlcoc forum but have had no assistance yet, so ive put it in here as there has been recent suspension talk on this forum.
I'm just posting to introduce myself and as a few Q's.
Ive been on the 80 series forum for some time now but having sold my old 24v manual , ive been searching for a decent 100 series , anyway i working down in yorkshire for acouple of days and spent a time looking at all the cruisers for sale down there , in the end ive managed to get an 02 model with the new dash and grille facelift , its a 4.2td with the 3sp+OD auto box, The body and chassis seems incredibly rust free and clean ( i'm scottish so i'm used to seeing the effects of salt on vehicles).
The mileage is only 86k with all the old mots to prove so that seems quite good.
It is however my first auto vehicle so i'll need to learna bit about that.
I need to get a vehicle Owners handbook ( not the workshop manual) even just to look at a pdf on the computer would be fine!
The issues ive seen so far are :
Wiper control
there seems to be one function not right ? it has the auto function that works but sometimes stops whilst the windscreen is still wet , and then goes like the clappers when it should be wiping less.
next position down on the lever does nothing ? ( Low spd i think)
bottom position is constant wiper control ( i thin hi spd)
Am i missing the low spd function
( i'm not sure what it should have due to no handbook)
AHC suspension control
Not sur if im doing things right so a bit of guidance here would be a help
note ive been doing things with the doors closed and the tran in park, until on the move.
the dash shows the position led in the N position ( solid Led).
i select low and the led flashes in the low position and lowers correctly
but then when i select N the leds dont change and the vehicle doesnt attempt to lift. but once the vehicle is on the move the led starts blinking on N and the suspension pumps up to the N position.
when i select the high position the led does not even flash or light in the high position in stopped or whilst driving ? Ive also tried selecting High whilst in Low range but this also has no effect.
Any pointers giving advise or links to internet info would be a great help thanks
greg