Rear Bumpers

G

Guest

Guest
Am putting a list of rear bumpers together and i'm wondering if people can add any to the following list:

ARB
TJM
Kaymar
Slee
Hanna Quality
4x4rUS (in the UK!)

i know of at least 2 more but just cant remember who they are!
_________________________________________________________________
Get all your favourite content with the slick new MSN Toolbar - FREE
http://clk.atdmt.com/UKM/go/111354027/direct/01/
 
G

Guest

Guest
Hi,
I've had this bumper for five years. I can confirm the design is quite
robust but the materials and finish are poor - an M14 bolt holding the
spare wheel bracket has snapped (low grade steel). Also, the swing arm
lock pin has broken. After a few years patches of powder coating
finish have come off with a thick layer of rust. If you don't mind
such minor and cosmetic faults, the bumper will certainly take a lot
of beating.
Rgds,
Roman (London, UK)
'92 HDJ80 (auto)
On Fri, Sep 12, 2008 at 8:08 AM, chris coombs
<[Email address removed]> wrote:
 
G

Guest

Guest
Hi,
also got an IEF Engineering bumper on my troopy. Fully agree -
locking pin mechanism is not the best, but it certainly is solid.
Pretty awful lights I found (especially in this day of cheap,
waterproof LEDs) so I stuck some LEDs on mine. And yup a badge on it
says Outback Extreme. All in all, considering price I was happy
enough, but I do have to admit that the tolerances it was made with
were a touch dodgy. I had to prise open the rear 'wings' that extend
forward with a big jack, and also do quite a lot of shimming for
certain bolts. Like Roman says, minor stuff.
Gil
On 12 Sep 2008, at 12:30, Roman wrote:
 
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks