dave smith
Active Member
- Joined
- Jul 7, 2011
- Messages
- 64
- Country Flag
Evening all I am trying to work out what the rim width is on my Collie (after market wheels)
there is no size or offset stamped or cast into the rim.
I have measured outside edge to outside edge at 9" the standard wheel measures 8". I know the standard alloy is a 7JJ so I am assuming that the others will be an 8JJ (they fill out the wheel arches with a standard size 265/70x16 tyre and the standard wheels dont.
so am I correct in guessing that they are an 8" rim? if they are then a set of 305/70x16 muds should go on ok with a bit of a lift obviously!
Regards Dave
there is no size or offset stamped or cast into the rim.
I have measured outside edge to outside edge at 9" the standard wheel measures 8". I know the standard alloy is a 7JJ so I am assuming that the others will be an 8JJ (they fill out the wheel arches with a standard size 265/70x16 tyre and the standard wheels dont.
so am I correct in guessing that they are an 8" rim? if they are then a set of 305/70x16 muds should go on ok with a bit of a lift obviously!
Regards Dave