Spacers 30mm or 38mm or 40mm

[Graham]

Hi All,

Can I please get some opinions on spacer thicknesses.

I can get 30mm, 38mm or 40mm

The 38mm one's are cheaper as they are cast to that 38mm thickness.
The 30mm one's are one's that have been machined to 30mm thickness, probably from a longer cast length.

Didn't ask about how they got 40mm.

Any way.


Is 38mm not too wide for our 120 series?

Gra.

 

[Craig Yeoman]

Hi Graham. 2 Things that come to mind. First concern for me would be the rub when stearing on full lock. My AT2's rub a bit at times, but have eased as wear has taken place. Secondly, for me I would be keen on the 38mm just on thickness and the look it would give the truck. Issues may come in with the tyre protruding near on the outside of the wheel arch(but should still be fine) and the increased spray in wetter weather. I would give greater concideration to the machined 30mm spaces.