wheel nut source needed urgently!!

G

Guest

Guest
Andy,
Don't the standard wheel nuts fit?
Why not go to the original supplier or maybe Milners and get them to
deliver them to your mate in Devon on Saturday? Or get them delivered
here on Saturday am and swap your wheels on the way down and then pick
them up on the way back up.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
G

Guest

Guest
Andy,
Don't the standard wheel nuts fit?
Why not go to the original supplier or maybe Milners and get them to
deliver them to your mate in Devon on Saturday? Or get them delivered
here on Saturday am and swap your wheels on the way down and then pick
them up on the way back up.
--
Regards,
Julian Voelcker
Mobile: 07971 540362
Cirencester, United Kingdom
1994 HDJ80, 2.5" OME Lift
 
G

Guest

Guest
What type of nuts Andy? There's ones with a big washer that sits against
the wheel and there's the sort with a tapered fit to the wheel? I've got
a few tapered ones spare but not enough for a whole set.
Cheers,
Jon.
-----Original Message-----
From: [Email address removed] [mailto:[Email address removed]]
On Behalf Of ANDY BELL
Sent: 17 November 2005 21:32
To: [Email address removed]
Subject: [ELCO] wheel nut source needed urgently!!
Hi all,
In preparation for Salisbury (and my winter trip) I just bought 4 new
BFG ATs and some steel wheels from Bronco. Being a complete idiot, I
accidentally ordered lock nuts (set of 4) instead of wheel nuts (set of
24!) to come with the wheels.
My existing tyres are a mish mash of worn out rubbish inherited from the
previous owner, and the wheels are the std 16 inch alloys, so the bolts
won't fit steel wheels.
I am working tomorrow and then driving down from Lancashire to Devon on
business on Saturday. I wonder if anyone can recommend a place where I
can pick up some nuts for steel wheels on the way? This way I can take
my new wheels in the boot and change them Saturday night. I don't think
the existing tyres are anything like upto going off road, so I'm a bit
on the desperate side.
Cheers and thanks,
Andy
 
G

Guest

Guest
I've got 4 of the tapered ones that I replaced with lockers, you
should only need 20 if you have 4 lockers.
Regards, Clive.
On 11/17/05, Jon Wildsmith <[Email address removed]> wrote:
the
w
On
4!)
an
w
 
Don't like the adverts? Remove them by becoming a supporting member.   Click here
G

Guest

Guest
I have just thought, mine are the washer ones for aly wheels so prob. no good.
Clive.
On 11/17/05, Clive Marks <[Email address removed]> wrote:
t the
few
] On
FG
24!)
e
can
new
he
 
G

Guest

Guest
try Nene Valley off road 01604 781187 in Kettering. not far off the M1. Ed
-----Original Message-----
From: [Email address removed] [mailto:[Email address removed]]On
Behalf Of ANDY BELL
Sent: 17 November 2005 21:32
To: [Email address removed]
Subject: [ELCO] wheel nut source needed urgently!!
Hi all,
In preparation for Salisbury (and my winter trip) I just bought 4 new BFG
ATs and some steel wheels from Bronco. Being a complete idiot, I
accidentally ordered lock nuts (set of 4) instead of wheel nuts (set of 24!)
to come with the wheels.
My existing tyres are a mish mash of worn out rubbish inherited from the
previous owner, and the wheels are the std 16 inch alloys, so the bolts
won't fit steel wheels.
I am working tomorrow and then driving down from Lancashire to Devon on
business on Saturday. I wonder if anyone can recommend a place where I can
pick up some nuts for steel wheels on the way? This way I can take my new
wheels in the boot and change them Saturday night. I don't think the
existing tyres are anything like upto going off road, so I'm a bit on the
desperate side.
Cheers and thanks,
Andy
 
G

Guest

Guest
Daft question but have you rung around some Toyo dealers? They surprise
me sometimes with what they have on the shelf - not often mind but worth
a shot IMO.
Pete
Eddie Priscott wrote:
> try Nene Valley off road 01604 781187 in Kettering. not far off the M1. Ed
>
> -----Original Message-----
> *From:* [Email address removed]
> [mailto:[Email address removed]]*On Behalf Of *ANDY BELL
> *Sent:* 17 November 2005 21:32
> *To:* [Email address removed]
> *Subject:* [ELCO] wheel nut source needed urgently!!
>
> Hi all,
>
> In preparation for Salisbury (and my winter trip) I just bought 4
> new BFG ATs and some steel wheels from Bronco. Being a complete
> idiot, I accidentally ordered lock nuts (set of 4) instead of
> wheel nuts (set of 24!) to come with the wheels.
>
> My existing tyres are a mish mash of worn out rubbish inherited
> from the previous owner, and the wheels are the std 16 inch
> alloys, so the bolts won't fit steel wheels.
>
> I am working tomorrow and then driving down from Lancashire to
> Devon on business on Saturday. I wonder if anyone can recommend a
> place where I can pick up some nuts for steel wheels on the way?
> This way I can take my new wheels in the boot and change them
> Saturday night. I don't think the existing tyres are anything
> like upto going off road, so I'm a bit on the desperate side.
>
> Cheers and thanks,
>
> Andy
>
>------------------------------------------------------------------------
>
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/05
>
>
 
G

Guest

Guest
Hi all,
Thanks for the help with this - I've just lucked out - a friend of mine
is heading down the M6 at the moment and will call in at Bronco 4x4 in
Leek, pick up some nuts and give me them in Devon tomorrow!!!
So I'll see you all at the meet :)
Best regards,
Andy
-----Original Message-----
From: [Email address removed] [mailto:[Email address removed]]
On Behalf Of Peter Browning
Sent: 18 November 2005 09:22
To: [Email address removed]
Subject: Re: [ELCO] wheel nut source needed urgently!!
Daft question but have you rung around some Toyo dealers? They surprise
me sometimes with what they have on the shelf - not often mind but worth
a shot IMO.
Pete
Eddie Priscott wrote:
try Nene Valley off road 01604 781187 in Kettering. not far off the M1.
Ed
-----Original Message-----
From: [Email address removed]
[mailto:[Email address removed]]On Behalf Of ANDY BELL
Sent: 17 November 2005 21:32
To: [Email address removed]
Subject: [ELCO] wheel nut source needed urgently!!
Hi all,
In preparation for Salisbury (and my winter trip) I just bought 4 new
BFG ATs and some steel wheels from Bronco. Being a complete idiot, I
accidentally ordered lock nuts (set of 4) instead of wheel nuts (set of
24!) to come with the wheels.
My existing tyres are a mish mash of worn out rubbish inherited from the
previous owner, and the wheels are the std 16 inch alloys, so the bolts
won't fit steel wheels.
I am working tomorrow and then driving down from Lancashire to Devon on
business on Saturday. I wonder if anyone can recommend a place where I
can pick up some nuts for steel wheels on the way? This way I can take
my new wheels in the boot and change them Saturday night. I don't think
the existing tyres are anything like upto going off road, so I'm a bit
on the desperate side.
Cheers and thanks,
Andy
_____
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/05
 
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks