Don't like the adverts?  Click here to remove them

Search results

  1. B

    Chassis Strut to Axle Broken - pics - how bad?

    To be honest personally I would say it is a simple enough fix, you could cut off what is there and remake or weld the steel that is there. It still looks like good thick steel and shouldn't be a problem to weld and strengthen.
  2. B

    Rear Door Weatherseal Replacement

    I bought a seal from Toyota but I don't think it was silly money, pretty sure it was about £120 and I thought that was expensive. Have a look under the carpet by the rear door as mine was rusty which I cut out and welded a new section across the back. That was the only rusty place on my 120.
  3. B

    Head light bulb upgrade.

    Karl, mine is a 2003 LC4. I'll have a look tomorrow at my lights. Are the later 120's canbus wiring setup?
  4. B

    Head light bulb upgrade.

    Karl, the reverse light bulbs look a bit weird. I'm pretty sure mine look like normal drum type bulbs if that make sense rather than 2 prongs.
  5. B

    One for two wheeled enthusiasts!......

    Nothing to do with the police, it'll be some nob in the government showing that they are justifying their job. Went along Douglas prom last night and can't believe what they have done, yet again some nob sat in at government offices that woke up one morning with a random thought and then decided...
  6. B

    One for two wheeled enthusiasts!......

    The clowns have put a temporary speed limit over the sloc again, I think it is 50 now. No idea why as no bugger crashes up there anyway, well maybe the odd bike and Michael Dunlop a good few years ago testing with a problem he had.
  7. B

    Self locking query

    I don't usually have the interior light switched on auto with the door open it is usually off. I tried all the door switches , holding them in and the interior light goes off after about 10 seconds on all 5 doors.
  8. B

    Self locking query

    I'll have a look at the switches on the rear doors and the rear door and see how it goes. Thanks guys..
  9. B

    Self locking query

    It is a pain and looks like you guys have had similar problems. Karl do you mean push the door switches to see if they are sticking or that the light is going on and off with the switches?
  10. B

    Self locking query

    My 120 locks itself if I am loading stuff into the back and side doors and have not got in and out within 30 sec or so. The bloody horn alarm starts beeping and scares the hell out of me unless you pretty much have the key in hand. It is fine if the front doors are open it doesn't miss behave...
  11. B

    ABS pickup?

    Stop it Shayne!! trying to tempt me with a V8 Land cruiser. A family friend in Oz use to do the conversions back in the early 90's in Land cruisers and Patrols. Yes Karl all tracking ect done a while ago now, I have all new bushes, links, top mounts, springs, dampers, they were out of kitchen...
  12. B

    ABS pickup?

    You're a star Shayne for 2 reasons. 1. I think that link info looks promising, I gave it a good read and lots of other forums seamed to have links to it too. 2. I don't have to think about Yaris GR's anymore, well for now anyway. I'm trying to convince myself I need a rugged off roader still.
  13. B

    ABS pickup?

    You are funny Shayne, why do they do that in close proximity? That dude had ABS Traction control lights on and was only a fuse I wish I was that lucky. Mine has no faults when I plug the scanner in, it did but that was the old abs sensor which was replaced. It to me feels like the L/cruiser...
  14. B

    ABS pickup?

    I know where you are coming from Shayne, I'm between two minds to get myself a new machine or keep the L/Cruiser. I'm toying with part exing the L/cruiser and getting a Yaris GR.. That would solve the problem.. :grinning:
  15. B

    ABS pickup?

    No reluctor ring in site on or near the shaft but I did fear you were going to say it is part of the bearing. I thought I had had a breakthrough with finding the small nic in the seal as the ABS sensor is right next to it. I am still struggling to sort the problem, my mate is going to have a...
  16. B

    ABS pickup?

    How and what does the ABS pickup on? I noticed when I had my driveshaft out there was a small nick in the seal near where the ABS sensor is but I would like to know what the sensor picks up on as I can't see anything. My ABS is still kicking in mid corner on random corners still. I swapped the...
  17. B

    Fuel line malfunction error code P1226

    Well it is alive and up and running, after a test run I found I had a fuel leak in number one steel fuel pipe tightened it up and all is good. I've done about 25miles of no limp mode which is brilliant and a weight off my mind. So I have learned that a fuel line malfunction means the injectors...
  18. B

    Fuel line malfunction error code P1226

    Super, thank you Tony.
  19. B

    Fuel line malfunction error code P1226

    Once I have fitted my new injectors does the system need bleeding like older type diesel systems? By partially undoing the steel lines at the injector to allow diesel out?
  20. B

    Fuel line malfunction error code P1226

    I bought 8 the other week from Toyota for when I was going to take my injectors from my parts Land Cruiser and swap them all over. I thought sod it I'll get some recon ones which have now turned into new ones. I thought if I leave the other Land Cruiser complete that would be best as that one...
  21. B

    Fuel line malfunction error code P1226

    Well I have had problems since my last post on this page, limp mode still. I sent my injectors away and have had them tested, one wasn't working and was leaking, another one was nearly as bad and the other two were borderline ok. Can't rebuild or it's not worth it and parts are hard to get for...
  22. B

    Injector Swap

    Scored the bolts and the washers that go with them £19 something for 4+4, they look about right, I haven't checked the part numbers as I don't have the receipt at hand. New injectors from Toyota were going to be £300 and something +vat, so I'm sending mine away to get checked and then possibly...
  23. B

    Injector Swap

    I am concerned now that the guy at Jacksons has ordered some random bolts for me since you have said your bolts are £39 and injector screws, my bolts were going to be £2 something each +vat, hmm weird I thought the sounded a bit cheap. what are injector screws?
  24. B

    Injector Swap

    Ace! glad you got it out. I've ordered my bolts through Jacksons here on the Isle of Man, they are the Toyota dealers over here. I thought I'd ask about the pipes and thought if they were 150 I would have thrown the boat out and got some but at 56 plus vat each they can keep them and I'll try...
  25. B

    Injector Swap

    I've just ordered some new bolts, I think the guy said they were £2 something plus vat each . New steal pipes were £56 plus vat each so I haven't ordered them as I will give the old pipes another go when I change my injectors.
  26. B

    Techstream confusion

    Karl I can't even find anywhere to put the injector codes on the Techstream I have, maybe my ecu runs a different page than the later type ecu 120's. I'll have another play with the live data page to see if I can make it come alive. Tractionman I thought I was on the money with that find.. :sleepy:
  27. B

    Injector Swap

    Bugger, sorry to hear you are having troubles. I did a similar thing with a rubbish torque wrench with my camber bolts, you know something is not right then a millisecond later it has snapped. Gutted for you.
  28. B

    Techstream confusion

    This might be the page you were talking of . Different variations of 120 - 1KZ engines / D4D engines, 5 / 6 speeds etc... Injectors recalls etc.. - [Leaving Land Cruiser Club]
  29. B

    Techstream confusion

    My Techstream has two options one is KDJ12 or KDJ9, I must have been thinking of something else, the computer seams to list those 2 options but you can do it manually but things get confusing and to me the KDJ12 makes sense. I am going to get in touch with the fuel injector guy and ask his...
  30. B

    Techstream confusion

    If am changing my rattily injectors anyway do I really need to look at techstream? I was reading somewhere that my injectors are not programable type , mine don't have the numbers on the top but they are on the side of the injector which until I remove them I can't order recon ones.
  31. B

    Techstream confusion

    yes
  32. B

    Techstream confusion

    I only have one
  33. B

    Techstream confusion

    I don't know if it makes a difference but my 120 is a 2004 with 2 SCV's (red and green)
  34. B

    Techstream confusion

    Mine gives me 2 options of vehicle I think the one I clicked on was J120 and I think the other one was 1KD. Is the software you downloaded easy to use? I have limited computer skills .
  35. B

    Techstream confusion

    Mine says revised injection volume which when I rev doesn't go up or down.
  36. B

    Techstream confusion

  37. 20220501_222335.jpg

    20220501_222335.jpg

  38. B

    Techstream confusion

    I have got a page to come up, just waiting for my phone to email to my computer but as usual it is saying sending failed which means in about 10 mins I will have 6 emails coming soon.
  39. B

    Techstream confusion

    I'll head out and give it a try, Thanks.. I'll be back in a bit..
  40. B

    Injector Swap

    It is probably worth taking off and having a look for peace of mind, I don't think there is a gasket on it as I already tried to order one and was told by Toyota to use RTV silicon sealant .
  41. B

    Techstream confusion

    I have tried Connect vehicle and it does go to a page with lists of things but not like other people on the forums with live data page
  42. B

    Techstream confusion

    I don't know how to add pics from my computer
  43. B

    Injector Swap

    It is easy to see, as long as you can see the sump plug you should be able to see in with the sump plug removed. I was looking at my sump pick up gauze yesterday with a small pen like torch.
  44. B

    Techstream confusion

    Ha ha Karl, I have already done that or all the stuff I have listed won't come up unless connected . I just don't know where to go from there, I noticed that posts from other people the page looks similar but not the same layout .
  45. B

    Techstream confusion

    Which one as I have several? I have my 120, a parts 120 or my Holden .
  46. B

    Techstream confusion

    Hi guys, I have bought a Techstream disc thingy from ebay. I have got it running or well my mate has but I have no idea what I am supposed to be looking at or for for that matter. I am taking the injectors out to get recon ones but want to look at live fuel rates ect for the injectors before I...
  47. B

    Help with fault code 078(7) please

    I also have the exact same problem and have found that techsteam has said it is 078(7) where as 2 other scanners have said a different fault code p1226 fuel line malfunction .
  48. B

    Noisy LC 120 Diesel

    Hopefully soon when my computer geek mate sorts out my Techstream I'll be able to see my fuel specs for my injectors and I can take mine out and get the numbers off them and get some recon ones scored.
  49. B

    Noisy LC 120 Diesel

    Interesting read. My 2005 (2004 really) has injector numbers on the side of the injectors, not on the top. When I enquired about some recon ones the guy said there were 6 different types of injector for the 120 engines.
  50. B

    I love Godzillas, and needed something cool to pull it

    Pretty remote place Learmonth, bit of a one horse town I should think. What is your insta? I can checkout your Skyline.
Back
Top