In danger of over thinking this. As long as the grease isn't from Spar or Nisa and says bearing grease / CV grease you'll be fine. I just use the most commonly available Moly CV grease which you can get in Halfords and any other High Street car shop. A bit different with the bearing grease on the off roader because of the harsh conditions. It has salt water resistant and anti wash out properties. It says.
Does £102 seem about right for all the bearings for a front rebuild those are the 4 trunion and inner and outer wheel bearings? Either SKF or KOYO in brand?
Given the size and typical Milner cost of the small trunion bearings it sounds a little high but not much that's eight bearings in total for £102 ave of £12.75 each. Price for 1 trunion bearing is typically less than £8.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.