Julian
Well-Known Member
- Joined
- Sep 9, 2012
- Messages
- 694
Just putting together some details for a bit of suspension re-working
I am going to need to put a 40mm spacer on the rear bumpstops and a little 6mm ish spacer on the fronts.
I had been thinking of using some HDPE sheet, Is that a good idea or do you think they should be metal?
Thanks
Julian
I am going to need to put a 40mm spacer on the rear bumpstops and a little 6mm ish spacer on the fronts.
I had been thinking of using some HDPE sheet, Is that a good idea or do you think they should be metal?
Thanks
Julian