fridayman
Well-Known Member
If I already have 15mm coil spacers on my Ironman struts like these:
Could i replace them with equally thick (15mm) spacers like these:
... and the overall result would be the same lift, but more droop? Or is there something else limiting the droop at the moment e.g. the top control arm? I am trying to figure out if I gain any suspension travel if I do this.
Assuming the spring rate is linear, there should be no change to the ride quality.
Could i replace them with equally thick (15mm) spacers like these:
... and the overall result would be the same lift, but more droop? Or is there something else limiting the droop at the moment e.g. the top control arm? I am trying to figure out if I gain any suspension travel if I do this.
Assuming the spring rate is linear, there should be no change to the ride quality.