G
Guest
Guest
I added some of these LCML-posted notes to the one I already had from
John Holmaas, plus another recent one from Julian Voelcker:
http://www.a1.nl/phomepag/markerink/80window.txt
(and made John's photo link easier to use)
http://photos.groups.yahoo.com/group/80scool/vwp?.dir=/Holmaas&.dnm=wi
ndowmotor1.jpg&.src=gr&.done=http%3a//photos.groups.yahoo.com/group/80
scool/vwp%3f.dir=/Holmaas%26.dnm=gpsmount2.jpg%26.src=gr
My story: motor of drivers window failed because the factory gunk
used to seal the outward connectors (white stuff in John's picture)
melted, and got in the gear train.
--
Bye,
Willem-Jan Markerink
The desire to understand
is sometimes far less intelligent than
the inability to understand
<[Email address removed]>
[note: 'a-one' & 'en-el'!]
LCML Homepage/Unsubscribe: http://www.birfield.com/mailman/listinfo/landcruisers
Host Website: www.birfield.com
John Holmaas, plus another recent one from Julian Voelcker:
http://www.a1.nl/phomepag/markerink/80window.txt
(and made John's photo link easier to use)
http://photos.groups.yahoo.com/group/80scool/vwp?.dir=/Holmaas&.dnm=wi
ndowmotor1.jpg&.src=gr&.done=http%3a//photos.groups.yahoo.com/group/80
scool/vwp%3f.dir=/Holmaas%26.dnm=gpsmount2.jpg%26.src=gr
My story: motor of drivers window failed because the factory gunk
used to seal the outward connectors (white stuff in John's picture)
melted, and got in the gear train.
--
Bye,
Willem-Jan Markerink
The desire to understand
is sometimes far less intelligent than
the inability to understand
<[Email address removed]>
[note: 'a-one' & 'en-el'!]
LCML Homepage/Unsubscribe: http://www.birfield.com/mailman/listinfo/landcruisers
Host Website: www.birfield.com