part number

[revs4x4]

Wondering if anyone can help. I'm after the part number for the metal bracket that secures the rubber hose to the lower snorkel body.......(the one in the centre on picture 2 on the link...). Ive looked everywhere but cant find it!

Cheers,

Cei

http://forum.ih8mud.com/70-series-tech/ ... umber.html

 

[Mark N]

toyodiy.com

 

[wobbly]

Hi Ceiron

Looks like 53964

I found it by doing a reverse search on the top snorkel duct reference number, all the vehicles shown for that part number are north american spec though, and post 1999? It looks like this is a part for a later model that is being retro fitted to older models?

In the list

http://www.toyodiy.com/parts/p_G_200701 ... ?hl=53299B

It is shown as not needed?

Hope that helps.....

Pete

 

[revs4x4]

cheers Mark and Pete. Eventually found a site with piccies!!!!
might be of assistance to others as well??

Cei

http://en.gforceparts.com/catalog/Toyot ... 330/1/1703

 

[wobbly]

Was it the part I thought?

Pete

 

[revs4x4]

my pc decided to stop working, so I'm on a laptop at the mo....cant get to grips with it!!

Pete, from what I can see, that bracket has three holes in it, im after one with two holes. When I get a moment, I'll have a trawl and try and find one! It's for a 2006'ish is model of a 76/8 seriel, got it cheap, but missing a few vitals!

Very busy at the moment doing a barn conversion...got 9.5 cube of concrete to lay tomorrow morning....god hep me!

Ceirion

 

[wobbly]

53297E ?

I cant see any other 2 hole one.

Good luck with the cement!

Pete

 

[revs4x4]

Pete,

what's the ten digit part number for that one? (53297E)

Cei

 

[nivapilot]

looks like .53297-60050..

 

[revs4x4]

spot on. I'll give Me T a bell tomorrow and order the parts

thanks for the help guys.

Cei.