Chris Green90
Well-Known Member
Dirty Gal went in for MOT today and unfortunately she failed. Excessive play in the steering rack and CV boot Split. I had a set of steering rack bushes in the garage so thought I would crack on with it today. All went well but because towards the end I was getting tired and hungry I didn't connect the steering shaft back up before re-installing the rack. So here is the question.
I really don't want to have to drop the rack again and there isn't enough wiggle room to get them back together with it on so can it be pulld up from the top and re fitted that way???
I loosened the slide joint above the rag joint and that shaft is what I need to slide back in.
Thanks to Spindrift for the Max Ellery manual it really helped me out today but need a little advise on this.
Thanks all
Chris
I really don't want to have to drop the rack again and there isn't enough wiggle room to get them back together with it on so can it be pulld up from the top and re fitted that way???
I loosened the slide joint above the rag joint and that shaft is what I need to slide back in.
Thanks to Spindrift for the Max Ellery manual it really helped me out today but need a little advise on this.
Thanks all
Chris