Suspension

[C11ONX]

Hi guys
I have changed my spheres on my truck but it feels different when I drive it. Just wondering if the tracking need checking once they have replaced

 

[warrenpfo]

Different how?

 

[C11ONX]

A bit vague a bit top heavy a bit wishy washy. A bit like my explanation. Cannot explain you just know how your motor feels.

 

[warrenpfo]

My guess is your pressures are not correct and that's why it does not feel right. Check them first and go from there.

Did you change your dampers at the same time as the spheres?

You should not need to adjust your steering geometry or wheel alignment if you did not touch your torsion bars.

 

[C11ONX]

Torsion bars wernt touched. What's the correct pressure. I'm currently tuning 2 bar. But it's on 20s with 45 profile

 

[warrenpfo]

I'm not talking tyre pressure but the pressure in each sphere you replaced. Get them checked and compared to the FSM

 

[C11ONX]

I checked tyre pressures and they were all over the place. All running at 2.4 bar and drives a lot better. May drop the pressures to 2.2. All the spheres came from Pilates and were marked up front and rear