G
Guest
Guest
Good Morning All,
I am considering doing Dan Busey's (cruiserdan's) 7 pin mod, which allows
selection of low ratio with the choice to option of locking or not of the
Centre Diff Lock.
It is suggested that the black wire with the blue tracer is the one to
disengage, is that the same colour for UK specs 80,s? Did any one just cut
the wire or did they unpick the terminal 7 from the block and what did they
use for that?
I also do not always like the gear selection that is automatically chosen by
the auto when in low ratio, I believe that this signal is sent via the
switch at the one o clock position at the rear of the transfer box
interrupting that signal should allow the normal selection of gears from the
auto is that correct?
Anthony Graham
1994 HDJ80 1HD - T
West Wales
UK
I am considering doing Dan Busey's (cruiserdan's) 7 pin mod, which allows
selection of low ratio with the choice to option of locking or not of the
Centre Diff Lock.
It is suggested that the black wire with the blue tracer is the one to
disengage, is that the same colour for UK specs 80,s? Did any one just cut
the wire or did they unpick the terminal 7 from the block and what did they
use for that?
I also do not always like the gear selection that is automatically chosen by
the auto when in low ratio, I believe that this signal is sent via the
switch at the one o clock position at the rear of the transfer box
interrupting that signal should allow the normal selection of gears from the
auto is that correct?
Anthony Graham
1994 HDJ80 1HD - T
West Wales
UK