Henri Stofberg
New Member
- Joined
- Aug 30, 2010
- Messages
- 47
I got a new baby and have put in a lot of effort so far.
On Saturday we are leaving on a 6,000km trip. Prob be gone foe 10-14days.
Here are some pics.
This is what she looked like when I brought her to Musina
And then I saw this. I want to convert my Troopie into something like this
Busy with the drawings to build the tent and then I will chop the roof to make it flat.
This is what she looks like now.
Some mods that have been done.
Built and fitted own built bullbar.
Refitted winch
Fitted HID spots. These units I cut out off existing lights and then mounted them in pipes. Then made my own mountings that will not rattle loose.
Fitted dual battery setup that is DC2DC based.
Wired all the Aux wiring via its own fuse box.
Aux battery is 105Ah and is mounted in the back, recessed into the skin car.
Fitted strip LED's all around the inside of the car. 2 x 12LED units on the inside in the back, and 2 x 9LED units in the front. Also fitted 1 on the back for lighting behind the car for camping.
Fitted 5 x 25A Hella connectors, all round the inside the car.
Fitted 20 storage bins. 450mm(L) x 300mm(W) x 180mmH(H) ea.
Fitted 80l dual door, fridge freezer combo.
Built a carrier that houses 2 x 20l water containers, with taps, on the second spare wheel carrier.
Fitted 325/75/16 Maxxis Bighorn Muds on 10J rims.
Still need to mount the compressor and fit a pressure control lever and gauge to control the air springs from inside the car.
On Saturday we are leaving on a 6,000km trip. Prob be gone foe 10-14days.
Here are some pics.
This is what she looked like when I brought her to Musina
And then I saw this. I want to convert my Troopie into something like this
Busy with the drawings to build the tent and then I will chop the roof to make it flat.
This is what she looks like now.
Some mods that have been done.
Built and fitted own built bullbar.
Refitted winch
Fitted HID spots. These units I cut out off existing lights and then mounted them in pipes. Then made my own mountings that will not rattle loose.
Fitted dual battery setup that is DC2DC based.
Wired all the Aux wiring via its own fuse box.
Aux battery is 105Ah and is mounted in the back, recessed into the skin car.
Fitted strip LED's all around the inside of the car. 2 x 12LED units on the inside in the back, and 2 x 9LED units in the front. Also fitted 1 on the back for lighting behind the car for camping.
Fitted 5 x 25A Hella connectors, all round the inside the car.
Fitted 20 storage bins. 450mm(L) x 300mm(W) x 180mmH(H) ea.
Fitted 80l dual door, fridge freezer combo.
Built a carrier that houses 2 x 20l water containers, with taps, on the second spare wheel carrier.
Fitted 325/75/16 Maxxis Bighorn Muds on 10J rims.
Still need to mount the compressor and fit a pressure control lever and gauge to control the air springs from inside the car.