Search results

Haven't been on for a while Comp Died :oops: Lost every thing bought new one:) getting back to the Point I tried a top up Auto transmission on my truck And yes it works, A fine tube down the dip stick as far has the the Tank Then used a Cheap Sprayer that holds 5Ltr put the end in to the...

Hi I have a new Idea:rolleyes: on filling auto Put Small clear Tube Down filler first hope it will let the air out then fill with a 5Ltr garden spray The sprayer has a Small outlet pipe hope there is enough Room for Both Let you know whether it works OR not

No need to Panic :fearscream: cruiser is safe don't let um near it i have had to rescue all the others they have had Funny old car no oil warning of low oil on the Dash :confused: i keep telling um Use The Bloody Dipstick :weary:Its a Peugeot 207 Not my cup of Tea A friend told me long time...

Jest got in :confused: Kids:confused: Dad my Engine light is on ( Me:worried:) what do you mean (kids) light on the Dash is on :confused: got there No oil:screamcat: Empty:openmouth: got um home:) Car is in garage in the morning keeping fingers crossed won't mean new Engine One Can But...

Its going to be a swap nobody can agree which is the Right one:confused: i have been thinking about ABS :fearscream: my light is staying on :fearful: But brakes work fine:) that's for another day Let you know about the swap:):)

:smile: thought you might say that Two Photo's But they can't tell me if Gasket comes with it they aren't sure which fits My 1996 Mod :confused:

Hi All i am reading and taking it all in i think i like the Funnel idea :D Its a Bugger when the Dealers can't agree which part Fit's or what its called:confused: and that's before i start If i fail to get gasket can i use Sealant if so what would you recommend Found drain plug:grin: But...

Hi Higgy thanks for the help Rang Milner This morning they are looking into it there was a change over on that Year??? they said they would check it with Toyota & Aisin I tried and Failed But they know what they are doing My Manual is no clearer ? found Drain plug, But Filler??? seems...

Hi haven't been around for a while :) been busy But back with a :confused: problem want to change Automatic trans fluid Can't find a sump pan gasket do they use a gasket or Sealant ? It's 1996 Toyota Prado Auto RHD KZJ950008802 (1996-2002) Eng diesel 2980cc 125 hp 1KZTE 3.0cc...

jack Bit the bullet bought new springs and shocks from Pedders the lift is up a bit not much tows grate no complaints ride a little bit stiffer did the job on a Sunday morning :sweat: took it on Monday afternoon for MOT Passed no problem Not bad for 1996 3Ltr Prado work horse :grinning...

Came across these this morning on Ebay coil spring -Monroe SP1950 Toyota land cruiser 90, Not sure if these are the OEM for my KZJ95 any one now if they were fitted original looked at Pedders like them bit expensive:grinning: .

i have replaced my shocks and springs with new ones from Roughtrax :cry: haven't lasted 12 months the coils were SUPLEX, tried ringing suplex waste of time their answer was Ring RoughTrax They have helped a little

Hi my workhorse is 1996 Land Cruiser Prado, Needed rear spring change, so i bought new Rancho, Shocks Big mistake they lasted only couple Months The new spring were (Suplex ) :disappointed: evan bigger mistake So i put new Monroe shocks. i think they have gone the same way, problem is i...

Sorry folks been bit tied up, thanks for the offer Trevor :thumbup: i tried the Graphite Powder worked like a dream so far keeping my fingers crossed :pray:

i have a 1996 land cruiser Prado KZJ95 some times my ignition key will not turn back to the lock position so it will not come out of the barrel i have been looking for a new one no luck so far tried WD40 not the answer never know when its going to play up local toyota dealer contacted...

Thanks Crispin for your help with my login Problems got there in the end :) thanks again hope this is in the right place

i was a member on the site some time ago until my comp died on me :sleepy: with my logon info .Had a few problems getting back in :oops: made it in the end

I have had the same problem :think: I bought new kits, But on the one side pins still looked to long so i put a thick washer on the back plate then pin through it, seems to have worked Strange its only on one side I striped the lot cleaned and or replaced any thing that looked iffy :icon-question:

Finished Rear Brakes :thumbup: looks good and no spare parts :pray: all went back, On to the fronts l will put pics on first chance i get

ordered the last few springs from Rough Trax They got them from Toyota hoping they will come in the morning :pray: Prices weren't as bad as i thought they might be Average £4.25 per spring

Bob Understood :thumbup: These bloody brakes or cracking me up But The boys in Rough Trax are helping me sort it :thumbup: Toyota could learn a lot from Barry and Jamie cant speak Highly enough of them, so far the parts i ordered on Friday arrived early this morning :clap: Toyota...

Chas possible he might be on holiday :icon-question: Rang jamie in Rough Trax he is going to make some inquires as well Changing Subject a Bit im towing an Ivor Williams 14ft Stock Trailer going to look at my Suspension Can i pick some one,s Brains on here or do i need to ask in another...

Thanks BoB & chris will give him a ring, I live 5 min away from Toyota dealer wont help in anyway :mad: Its an Import, Back later :thumbup:

Late again :oops: ordered some parts off Rough Trax little while ago I will give them a ring in the morning about the springs there is 1 broken the one i have marked chris How do i contact Simom Holton

Chris what about Rough Trax is there stuff any Better (Springs) Shipping charges do not include any customs duties & taxes that may apply to your country at time of import. Bit mind Blowing spent a while studying Import+ Export don't recommend it :wtf: Takes the Shine of the Job Back...

chris been looking at these what's your view iv sent them an E/Mail to make sure they fit, they work out about £40 i was surprised Milner didn't do them sorry im bit late tonight

I was thinking while im changing Pads and shoes better change Springs rung Milner they don't do them can i get them in the UK?

Bob yes it is there in front of you But its covered by the plate that holds the Wheel Studs There is not enough room to get Fingers or small pliers in ??? Does this plate come off the Half Shaft ????

Hi only joined yesterday :icon-biggrin: Got a problem already Had a look at Rear Hand Brakes they need changing never done this one, Question Do i need to take Half Shaft out There is not enough room to work on them even though i took pads and Disc off any help would be Appreciated...

hello bit late to say much tonight pop in tomorrow :thumbup: mines a prado almost as old as me:icon-redface: