Don't like the adverts?  Click here to remove them

Abs vsc lights

CANEX

Member
Joined
May 15, 2010
Messages
110
Country Flag
england
OK I've got the dreaded ABS & VSC lights staying on.
They have flashed on when the car was cold occasionally - but used to go off once ignition turned off then back on.
Now they stay on all the time.

I've bridged the connectors E1 & Tc and the ABS light flashes 4 6 5 9 and then repeats.
The VSC light flashes 4 3 4 7 5 3 then repeats.
According toradio display all test passed!

Can anyone interpret these flashes please?

cheers
Chris
 
I've tried A code reader & no codes stored!

Anyone any ideas as my MOT is due in a few weeks :(

cheers
Chris
 
Am I right in thinking the brakes are a pressurised system with a pump providing the pressure - rather than a vacuum assisted system?
 
Yes, there's an electric pump under the brake master cylinder and a pressure canister between the master cylinder and the O/S inner wing.

If the pump fails (or you run out of pressure when e.g. bleeding the brakes) you will get the ABS warning light, A red brake failure light and a warning buzzer. You will also have very little in the way of brakes :shock:.

It doesn't sound as though the brake pressure pump is you problem.

Bob.
 
No - the pump is running correctly.
I'm trying to find how to convert the flashing abs & VSC lights into fault codes - anyone know?
 
Don't like the adverts?  Click here to remove them
OK I've managed to get the codes read properly and get 2:

C1223 fault in ABS control system
C1246 fault in master cylinder sensor

Anyone help please?
 
SORTED :icon-biggrin:

The brake light fuse had gone !!!

Turns out I had been driving for a week with no brake lights!
good job I'm a steady driver :icon-rolleyes:

Thanks for your help

Cheers Chris
 
:shock: :shock: Now that is worth remembering :thumbup:.

Glad you got it sorted, but how bizarre is that :?.

Bob.
 
Back
Top