warrenpfo
Well-Known Member
- Joined
- Jul 21, 2010
- Messages
- 2,895
Sill question but let me explain.
I want to spray some dinitrol penetrating fluid in my chassis rails for good measure and my thinking at the moment is to run a tube from one end to the other with the spray nozzle on the end and pull the trigger as I slowly pull the hose out again. That way i will know the full length of the chassis member has had a good spray inside.
The hose is about 1/4" in thickness and i will feed a cable puller through first to then pull the hose back with as it wont be ridged enough on its own to feed through.
I want to spray some dinitrol penetrating fluid in my chassis rails for good measure and my thinking at the moment is to run a tube from one end to the other with the spray nozzle on the end and pull the trigger as I slowly pull the hose out again. That way i will know the full length of the chassis member has had a good spray inside.
The hose is about 1/4" in thickness and i will feed a cable puller through first to then pull the hose back with as it wont be ridged enough on its own to feed through.