Ignition feed

[J66P]

I am after picking up an ignition feed to power up a few components that i want on ignition rather than permenant.

looking at the wiring under the dash there isnt any clear point to take the feed from other than the switch, does anyone have any suggestions

 

[TonyP]

Do you need ignition or will the accessory one do? There is a acc feed in the ISO plug at the back of the radio, this is where I picked mine up from.... pin 7 on the plug...

Here is the complete ISO plug pin outs:

ISO Pin - Function - ISO Colour
1 - LF Positive - White
2 - LR Positive - Green
3 - RR Positive - Violet
4 - RF Positive - Grey
5 - Amplifier Remote - Blue/White
6 - Antenna - Blue
7 - Acc 12V - Red
8 - Ground - Black
9 - LF Negative - White/Black
10 - LR Negative - Green/Black
11 - RR Negative - Violet/Black
12 - RF Negative - Grey/Black
13 - Telephone Mute - Sky Blue
14 - Illumination - Orange/White
15 - Not Used
16 - 12V - Yellow


HTH

 

[J66P]

ermm never though of that, just the ticket I recon, especially as I need to go behind there to pick up my reverse camera signal anyhow

many thanks

 

[Crispin]

why not just piggie back off the cig lighter?

 

[J66P]

cos I think my brain has gone dead, I dont know why I dont really

 

[Crispin]

Always lots of juice (10A+) and always simple to get to