96 80 4.2 td 24 valve, driving me mad.
The engine will not tick over/idle after being revved. It starts and runs fine, revs out well- the engine is good.
When revved up and the throttle is released it just cuts out, stops dead, engine cuts out as if the key was turned off.
I don't have it that long and it was modified a but before i bought it.
Had it with a mate that is a mechanic, he got the injectors cleaned and thought he had the problem solved, i collected it today, driving it down the road like a child on christmas day so pleased to have my 80 back again, got to the first road end, hit the clutch and the needle on the rev counter just kept falling. lights came on on the dash, no engine. dropped into 3rd gear, released the clutch- engine running again no problem but as soon as i push in the clutch again and the drive is off the engine i lose all power.
Also if i do get it started and ticking over it ticks over about 1000rpm and revs up to 1200-1300 and down again on its own. Again as soon as you blip the throttle it just cuts off when it should go back to idling.
someone please point me in the direction of what is wrong.
james
The engine will not tick over/idle after being revved. It starts and runs fine, revs out well- the engine is good.
When revved up and the throttle is released it just cuts out, stops dead, engine cuts out as if the key was turned off.
I don't have it that long and it was modified a but before i bought it.
Had it with a mate that is a mechanic, he got the injectors cleaned and thought he had the problem solved, i collected it today, driving it down the road like a child on christmas day so pleased to have my 80 back again, got to the first road end, hit the clutch and the needle on the rev counter just kept falling. lights came on on the dash, no engine. dropped into 3rd gear, released the clutch- engine running again no problem but as soon as i push in the clutch again and the drive is off the engine i lose all power.
Also if i do get it started and ticking over it ticks over about 1000rpm and revs up to 1200-1300 and down again on its own. Again as soon as you blip the throttle it just cuts off when it should go back to idling.
someone please point me in the direction of what is wrong.
james