Safari snorkel bracket request

[Lorin]

Has anyone got an unfitted safari snorkel for an 80 that I could borrow the pillar bracket to make a copy?

This bit

I removed my snorkel when the truck was being sprayed and have somehow lost the bracket!

I am more than willing to pay for the privilege of just borrowing the bracket and returning it.

 

[felix2566]

If you have the snorkel and I presume the holes on the car where it was fitted it would be easy enough put the snorkel in position and make a cardboard template.
Then copy that out onto a piece of steel or aluminium.

 

[Ben Stratford]

I can send one from my 60 if the holes are the same placement. Do you or anyone have any measurements @Lorin ?

 

[Lorin]

If you have the snorkel and I presume the holes on the car where it was fitted it would be easy enough put the snorkel in position and make a cardboard template.
Then copy that out onto a piece of steel or aluminium.

Yeh I suspect this is what I’ll have to do if I can’t borrow an 80 one. You’re right templating the flat shape and holes isn’t hard. Getting the angle correct will be a pain.

 

[Lorin]

I can send one from my 60 if the holes are the same placement. Do you or anyone have any measurements @Lorin ?

Thank you for the offer. I should be able to see if the part numbers are the same on Safari website….

If not, I’ll get the measurements and post up. Be interesting to see if they are the same.

 

[Lorin]

Thank you for the offer. I should be able to see if the part numbers are the same on Safari website….

If not, I’ll get the measurements and post up. Be interesting to see if they are the same.

Just checked on Safari website and 60 bracket is unfortunately completely different.

 

[Shayne]

Can't drive without it but surely someone could take it off for a minute and draw around it giving you what size of rectangle to start with , angle and holes .