warrenpfo
Well-Known Member
- Joined
- Jul 21, 2010
- Messages
- 2,895
Right so i have the rocker cover off and all cleaned up with a new gasket ready to go. The mating surface is clean and free from contamination but whilst in there i thought i would tackle the valve clearance... and this is where i have hit a brisk wall.
Below are a few pictures of the inside any comments welcome as to the condition. The engine could do with some cleaner on the next oil change but otherwise i think it looks clean and good. There seems to be so glazing or shiny bits on the cam shaft which i have a picture of and wondered if this was normal.
Oh and the manifold looks nice and clean too which is pleasing but i guess no EGR is a big help there.
2 sec will upload pictures
Below are a few pictures of the inside any comments welcome as to the condition. The engine could do with some cleaner on the next oil change but otherwise i think it looks clean and good. There seems to be so glazing or shiny bits on the cam shaft which i have a picture of and wondered if this was normal.
Oh and the manifold looks nice and clean too which is pleasing but i guess no EGR is a big help there.
2 sec will upload pictures