warrenpfo
Well-Known Member
- Joined
- Jul 21, 2010
- Messages
- 2,895
I have had my drivers door panel off to replace the window rubber and whilst in there give it all a good clean and some dinitrol in the bottom.
I had no vapor barrier as the PO must have removed it when he installed some replacement speakers and at the same time butchered the door card which i now need to also fix as most of the plastic clips have pulled through the masonite.
I have noticed over the week with the door being "naked" that when it rains water will quite happily run down the window and then along and into the door and out one of the 3 holes in the bottom of the door. I wanted to ask if this is the way it is supposed to work as for some reason I had always thought a door was a water tight panel but clearly not.
I had no vapor barrier as the PO must have removed it when he installed some replacement speakers and at the same time butchered the door card which i now need to also fix as most of the plastic clips have pulled through the masonite.
I have noticed over the week with the door being "naked" that when it rains water will quite happily run down the window and then along and into the door and out one of the 3 holes in the bottom of the door. I wanted to ask if this is the way it is supposed to work as for some reason I had always thought a door was a water tight panel but clearly not.