WUGG my 95 LC

[David]

Done bit more to the Inside today

Sent from my HTC One X using Tapatalk

 

[AndyCook]

Looking good
Are you going to cover the ply?

Now why didnt i think of doing that!
On long trips i used to remove the middlerow seats and fit a shelf unit like you have made to put mountain bikes on (in bags)



Sent from my GT-P1010 using Tapatalk 2

 

[David]

I will be covering it with something but not sure what yet

 

[jbecks]

rubber?

 

[AndyCook]

Hi cwc

Just spotted this on my bookshelf. . Doh
It was meant to go with Wugg

PM me your address and i will send it your way

Andy

Sent from my GT-P1010 using Tapatalk 2

 

[David]

Thanks Andy that maybe very handy

Sent from my HTC One X using Tapatalk

 

[David]

Done bit more this morning, I have carpet tiled the back in bathroom quality tiles
I got 25 tiles brand new of the bay for a tenner and just up the road , the ally cappings cost another 20 note plus the glue a fiver
So all in all less than a rubber mat , last mat I had in the Defender still smells

 

[clivehorridge]

Very neat job that! Worth the extra to finish it off!

 

[David]

I just need to do something about the exposed plywood edges not sure what any ideas anyone

 

[Chas]

I just need to do something about the exposed plywood edges not sure what any ideas anyone

I'm in the process of doing similar and I intend to use some ally angle. It would give you a sort of 'frame' for the carpeted area.

 

[Chris Green90]

I use ally U channel on my flight cases. Works spot on and if you get the right size its a snug enough fit to not really need fixings although small countersunk screws do the trich if you feel the need.

 

[Chas]

I use ally U channel on my flight cases. Works spot on and if you get the right size its a snug enough fit to not really need fixings although small countersunk screws do the trich if you feel the need.

On one section of mine I've also used a U channel.

 

[AndyCook]

I used U-Channel Ali on my drawer build for hilux


Sent from my iPhone using Tapatalk

 

[David]

Have to see what I can find

 

[Gary820]

Nice job.

 

[David]

Done a little more this morning
Fitted a second leisure battery and a Durite voltage sensing relay




and fitted a pair of rear LED worklights

 

[AndyCook]

good to see my leisure battery relay "shelf" is being re-used

 

[froggy Steve]

Those LED lights are great, I have one as a reversing light as the single glow from the rear light coupled with the dark tint = nil visibility! I wouldnt mind fitting some sort of LED brake / turn lights on my rack - I will go see whats on flea bay

Steve

 

[David]

Not done a lot today just knocked up a CB mount on the spare wheel carrier

 

[David]

While I was out gritting last night some guy tinted my rear windows

Sent from my HTC One X using Tapatalk