Handbrake upgrade

[Shayne]

Landcruiser Handbrake Upgrade Kit for HZJ-FZJ75/76/78/79/80 Series | Superior Engineering

Huge range of heavy duty 4X4 accessories & suspension parts for most makes & models of 4WD vehicles. Buy online. Australia wide delivery.

www.superiorengineering.com.au

I actually thought this up 9 years ago !

Shayne​

Well-Known Member​

Guru
Joined Feb 2, 2013 Messages 14,297

• Feb 21, 2013
• #94

But while i was writing i had another (probably stupid) idea . If the handbrake gives up because of suspension flex then it seems obvious the cable is being over stressed which is why it pulls out and needs reset . You can't make the cable longer because then it wont work at all ..... unless , you alter the handbrake lever so the cable connects to it further forwards . This means when you pull the handbrake up your pulling more cable in to activate the brakes , but when you put it down your adding a few inches of slack which might be enough to let the suspension flex without harming the brakes .

 

[Shayne]

Had a chat with all my mates at nasa before I woke up this morning about what vaguely useful thing I might do today and they suggested I should take a good look at my handbrake and make some precise calculations .

So I took my hammer and my thumb and got to it .

I was hoping to show a tidier finish but the grandkids arrived .

Good enough to satisfy my curiosity anyway and time will tell if it reduces the frequency handbrake needs adjusted .

 

[Shayne]

Not easy with a stick welder and rods that recommend 120amps but it will do