Graham
Well-Known Member
Hello All,
Well, finally starting to take shape.
I removed the 3rd row of seats.
I made a frame, which is painted blue, and fastens into the side receptors that were for holding the seats.
.
.
.
Then made a cardboard template, and copied the template to a piece of 12mm ply.
Duly covered with grey carpet, glued and stapled, as found in the land Cruisers.
.
.
Inverter fitted and working. Supplied with 35mm cable.
protected with 100 amp fuse.
.
.
With 2 x double 13 amp RCD sockets.
.
3 under shelf boxes fitted length ways,
.
and a further 2 followed in side ways.
.
Total 5 under shelf store boxes.
Graham
Well, finally starting to take shape.
I removed the 3rd row of seats.
I made a frame, which is painted blue, and fastens into the side receptors that were for holding the seats.
.
.
.
Then made a cardboard template, and copied the template to a piece of 12mm ply.
Duly covered with grey carpet, glued and stapled, as found in the land Cruisers.
.
.
Inverter fitted and working. Supplied with 35mm cable.
protected with 100 amp fuse.
.
.
With 2 x double 13 amp RCD sockets.
.
3 under shelf boxes fitted length ways,
.
and a further 2 followed in side ways.
.
Total 5 under shelf store boxes.
Graham