Stainless 3 inch exhaust.

[Guest]

John, welcome back. 600 e-mails ! Exhaust was made last Friday. 3 inch from the turbo outlet to the end of the tailpipe. Single silencer, one flexi joint in the pipe, plenty of strong mounting brackets, the system is in 3 bolted together sections. Yes it is noisier than std, but I couldn't say by how much. The quality of the bending and welding is excellent. There is no distortion of the sidewalls. I am pleased with the job. The actual price was =A3600. I would reccomend Longlife at Falfield.
Gareth Jones '97 1-HDFT Newport S.Wales.

 

[Guest]

Hi Gareth
Im really happy your happy with the job on your exhaust. Could you tell me
why it was 600 and not the ?500 I was told it should be. Are you going to
take a few pics of the work eventually.
John C
92HDJ 80 1HDT Ireland
----- Original Message -----
From: "Gareth Jones" <[Email address removed]>
To: <[Email address removed]>
Sent: Monday, July 04, 2005 2:24 PM
Subject: RE: [ELCO] Stainless 3 inch exhaust.
John, welcome back. 600 e-mails ! Exhaust was made last Friday. 3 inch
from the turbo outlet to the end of the tailpipe. Single silencer, one
flexi joint in the pipe, plenty of strong mounting brackets, the system is
in 3 bolted together sections. Yes it is noisier than std, but I couldn't
say by how much. The quality of the bending and welding is excellent. There
is no distortion of the sidewalls. I am pleased with the job. The actual
price was ?600. I would reccomend Longlife at Falfield.
Gareth Jones '97 1-HDFT Newport S.Wales.

 

[Guest]

John, when they spoke with you and Renate, Longlife had not had a look
at the installation in the vehicle. The sytem had to be mandrel bent
which is a long winded, but better end result, job. It just took a long
time. I dropped the vehicle off at 8.00 am and returned at 4.30 just as
they were finishing.
I will try and take some photos.
Gareth Jones.