Rob Johnson
New Member
- Joined
- Jan 26, 2011
- Messages
- 34
Just changed the oil on my 1997 3.0td 95.
It took 6.8 litres and the level looked correct at the time.
Then paranoia crept in and I started thinking there was too much oil in but I can't seem to get a good reading as the dipstick seems to show really high on one side (like it's getting covered in the tube) and lower (albeit a few mms over the top mark) on the other.
Any ideas or reassurance would be great!!
Rob
It took 6.8 litres and the level looked correct at the time.
Then paranoia crept in and I started thinking there was too much oil in but I can't seem to get a good reading as the dipstick seems to show really high on one side (like it's getting covered in the tube) and lower (albeit a few mms over the top mark) on the other.
Any ideas or reassurance would be great!!
Rob