Fitted VIAIR tank underneath today. Plenty of room above the spare wheel. Piped in on a temporary basis as it's so cold I can't feel my fingers anymore. All working but the compressor needs to be positioned and secured once I build my drawer system. Then there will be a second feed to the rear bumper.
I took the opportunity whilst under there to free off breathers, clean out fuel vent etc. I also took off the spare wheel mechanism and gave that a good service, then I made a new winding handle to replace that awful thing that you get with the truck.
Works really well as the T on the end can't slip out of the socket on the winder.
Chris
I took the opportunity whilst under there to free off breathers, clean out fuel vent etc. I also took off the spare wheel mechanism and gave that a good service, then I made a new winding handle to replace that awful thing that you get with the truck.
Works really well as the T on the end can't slip out of the socket on the winder.
Chris