Don't like the adverts?  Click here to remove them

A Christmas rear bumper

Jacob100 said:
I did some speculative emailing with opony-4x4.pl and they seem like really good value, even factoring in shipping from Poland. I think they go under a couple of different names and list their bumpers on eBay where the prices are much higher. Believe they’ve been recommended on here before.
Click to expand...

I second Opony4x4. They are just resellers of Fabryka 4x4 products but their prices and service is good (and they arent the ones selling the same items for double on eBay!)

Ive bought and fitted all of the Fabryka4x4 accessories for the 80 (front winch bumper, rear bumper, swing out wheel carrier, swing out jerry can holder, rock sliders, steering damper guard, various brackets and mounts etc.. I think the whole lot only came to about £1800 delivered and the build quality and fitment is spot on.
 
As others have correctly pointed out..mine did indeed come from 4x4specialist/Lithuania. You will find them on FB.
There are various options like reverse lights, wheel carrier, winch and light guards. The bullet is optional.
Plan it carefully..there needs to be a place for the number plate!
IMG-20180809-WA0000-1.jpg
 
Michael Clark said:
I second Opony4x4. They are just resellers of Fabryka 4x4 products but their prices and service is good (and they arent the ones selling the same items for double on eBay!)

Ive bought and fitted all of the Fabryka4x4 accessories for the 80 (front winch bumper, rear bumper, swing out wheel carrier, swing out jerry can holder, rock sliders, steering damper guard, various brackets and mounts etc.. I think the whole lot only came to about £1800 delivered and the build quality and fitment is spot on.
Click to expand...

That is quite high praise @Michael Clark and it sounds like your happy with the fitment and quality . Would you mind throwing some picks up of your particular setup?

Mojo said:
As others have correctly pointed out..mine did indeed come from 4x4specialist/Lithuania. You will find them on FB.
There are various options like reverse lights, wheel carrier, winch and light guards. The bullet is optional.
Plan it carefully..there needs to be a place for the number plate!
View attachment 152500
Click to expand...

That does look verywell made @Mojo and thank you for the picture. I think it was them that someone here had trouble making contact with. May I ask how you found the purchase experience?
 
Rosy said:
That does look verywell made @Mojo and thank you for the picture. I think it was them that someone here had trouble making contact with. May I ask how you found the purchase experience?
Click to expand...
think that was @Dances with Chimps

And you know how strong the front one is ;)
 
Don't like the adverts?  Click here to remove them
fbnss said:
And you know how strong the front one is
Click to expand...

Yes mate, it would be unfair for me not to
mention that I have seen first hand the specialist 4x4 front bumper take on a boulder and win! I don't think my ARB would have taken a hit where yours did and leave with nothing more that a graze to the paint job.
 
While im looking forward to fitting one of there turbos.
the welding on that 2nd wink rear bumper looks terrible..
 
chapel gate said:
While im looking forward to fitting one of there turbos.
the welding on that 2nd wink rear bumper looks terrible..
Click to expand...
Yes it was the first thing I noticed. the welding wasn't great... Its ok if you've made it yourself on a bench surrounded by crap. And a dodgy wire feed motor. (like me) .. But as a factory finish.. No ! .. Don't know how it passed QC.. My old gaffer would make me do it again...:thumbdown:
 
Mojo said:
..another pic of 4x4specialist rear wheel carrier/bumper. Plus they do side steps/rock slidersView attachment 152510
Click to expand...
I like the simplicity of the wheel Carrier.. I know its cheating but I'm Gonna copy some Carriers. Iv Started with some 30mm solid bar. and a stub axle and bearings from a Erde trailer. For a nice smooth swing out action... As per the Norm. I'm 'gonna' make it up as I go along:thumbup:
 
I’ve just had an ARB front bumper from Devon 4X4 for my 100 series, great service and the cheapest I could find advertised. I know it’s for the wrong wagon and also the wrong end, but just thought I would share my experience of using them.
 
Here is a pic of the front bumper. Ill take more of the rear and rock sliders tommorrow. I added the chequer plate cover for the winch (now powdercoated black). 41814296_512359199236685_2149609416293351424_n.jpg
 
Here is my fabryka 4x4 bumper. I asked them to add the lower bar in the bullbar, and the answer was : no problem, this is made in POLAND, not china. I didn’t even have to pay extra.
I’d love to see some pics of their rocksliders.

30567CE2-57F6-43FA-BD4D-7CB67CA95D99.jpeg
 
Thank you all for your contributions, and apologies for my tardy response.. a bit hard to type with an ale in one hand and a mince pie in the other :)

@Michael Clark would be great to have a pic of the fabryka rear bumper, also do you have a contact I could reach out to at opony4x4?
 
You must log in or register to reply here.

Similar threads

R
Harrop E-Locker a word of warning....
Replies
5
Views
299
LandcruisingFarmer
LandcruisingFarmer
Bmonck
For SOLD - GOBI-X folding step for rear bumper
Replies
3
Views
411
Bmonck
Bmonck
O
Towing advice / guidance - 1994 Diesel, stock
2 3
Replies
52
Views
3K
Tractionman
T
kanya3
Swing rear bumper & Shower system
2
Replies
30
Views
2K
kanya3
kanya3
hopeless wanderer
With a heavy heart - For sale in March 2024
Replies
8
Views
1K
hopeless wanderer
hopeless wanderer
Back
Top